DWW-2 Pcs 6mm Tube OD x 1/8 BSP Male Straight Push To Connect Fittings (PC6-01)

Specification: Model PL6-01.6mm Tube OD x 1/8 BSP.Operating pressure range: 0-1 MPa, 0-60 °C.Premium quality: Robust and durable, long service life.Wide application: used in connecting pipes and various pneumatic components. Quick connection: easy assembly and high installation efficiency.Product DescriptionProduct advantage:The product is of reliable quality, can be reused, and has a long lifespan.You can insert or remove the hose directly by hand, allowing you to make various connections.It can be used for connecting various pneumatic tools and has a wide range of uses.The clip connecting the air duct is made of robust plastic material, which has a good airtight seal to prevent leaks.After installation, it can be easily connected according to the pipe direction you need.Product parameter:Material: plastic and brassOperating temperature: 0 - 60°COperating pressure: 0-1 MPaApplicable hose: PU/PA/PE/PVC Tips: Do not apply additional external loads (bending, twisting or pulling) to the pipe opening, otherwise damage or leaks may occur.Packing list:2 PC adapter piecesWrap the raw material tape we have provided around the threaded connection of the PC connector, which can effectively prevent leaks during the connection process.Once the bottom is sealed, the pipe can be firmly connected and the blue seal can be rotated 360 degrees, with a good seal and no air leakage problems.After pressing the blue seal, insert the tube downwards, then screw on the threaded end and it is ready to use. Login prompt:Ensure that the pipe cutting surface is vertical, that there are no scars on the outer circumference of the pipe, and that the cross-section of the pipe is smooth and flat.When inserting the tube, it must be inserted fully into the bottom of the tube. Failure to insert the tube fully into the bottom may cause air leaks.Once the hose connection is installed, pull on the hose to ensure it cannot be pulled out of the hose fitting.The pipe fittings are easy to install, flexible and space-saving, with 360-degree free rotation, and the release ring adopts an elliptical design, making it easy to disassemble.Do not use in areas with excessive dust or particles, and do not use any medium other than air. This product is limited to air or vacuum environments.