[Helpful Tips] 1. Once the shower screen is installed, it is recommended to apply silicone sealant evenly to the edge (this product does not contain silicone sealant) to make the shower screen more durable and waterproof. 2. Once the shower diverter is installed, it must be left for 30 hours. Do not allow water to flow through and soak the moisture-retaining strip. Wait for the silicone sealant to cure before using it.[Multifunctional] Our shower barrier can be installed on the floor or sink, the outer edge of the countertop, and in the gap between the countertop and the wall to solve the problem of debris entering the gap (1-10 mm) and prevent water leaks. It eliminates drips, leaks, and the separation of wet and dry materials on countertops. (The shower diverter is only 18 mm high, so it won't cause tripping or problems on the countertop, and it's easy to move.) 【Applicable to Multiple Scenes】 The folding shower screen is suitable for all smooth floors and countertops, such as kitchen counters, sinks, bathroom doors, bathroom corners, bathtub edges, sinks, window sills, balconies, around washing machines, washing machine bases, etc. The toilet creates a spill-proof barrier that effectively repels water, keeping floors and countertops clean and tidy.[High-Quality Silicone Material] The shower threshold is made of environmentally friendly, elastic silicone with a soft, smooth surface. The silicone material is waterproof and mold-resistant, easy to clean, and resistant to fading, staining, and deformation. It is also heat-resistant and freeze-resistant, making it suitable for all seasons. The shower threshold and mounting system are equipped with an adhesive backing that provides strong adhesion and won't easily fall off.Easy to install: When installing the shower screen, the floor or work surface must be free of water and dust, otherwise the adhesive will not bond properly. You can use a knife to cut the required length, then peel off the backing and stick it in place. (When the shower screen needs to be bent, it is recommended to first cut it at a 45-degree angle, then cut it at a 96-degree angle for splicing. This makes it more stable and durable.)