1100W Concrete Vibrator 220V Electric Cement Poker for Construction Site Bridge

CHF 84.00
+ CHF 44.99 Versand

1100W Concrete Vibrator 220V Electric Cement Poker for Construction Site Bridge

  • Marke: Unbranded
Verkauft von:

1100W Concrete Vibrator 220V Electric Cement Poker for Construction Site Bridge

  • Marke: Unbranded

CHF 84.00

Bespaar CHF 35.00 (29%)

UVP

CHF 119.00
Auf Lager
+ CHF 44.99 Versand

14-Tage-Rückgabepolitik

Verkauft von:

CHF 84.00

Bespaar CHF 35.00 (29%)

UVP

CHF 119.00
Auf Lager
+ CHF 44.99 Versand

14-Tage-Rückgabepolitik

Zahlungsmethoden:

Beschreibung

1100W Concrete Vibrator 220V Electric Cement Poker for Construction Site Bridge

Key Features ▶High-quality Material: The thickened aluminum shell and plastic electric machinery have high-pressure resistance and corrosion resistance, which can effectively prolong the service life of the product. ▶High-quality Motor: 1100W high-power motor adopts temperature-resistant pure copper enameled wire and all-copper winding, which is not only firm and stable, but also has a longer service life. The amazing vibration frequency of 160Hz can effectively remove bubbles and help concrete to set faster and more firmly. ▶Easy to Operate: The full wrap-around handle, side auxiliary handle, and the lightweight design of the body (17.2 lbs) are ideal for continuous use. At the same time, the lock button on the handle can make it work continuously without manual pressing and reduce the intensity of work. ▶Low Noise: The silent axle inside the product can effectively reduce noise and provide you with a quiet and comfortable working environment. ▶Fast Heat Dissipation: The heat dissipation holes at both sides and cast aluminum head can accelerate the heat dissipation of the motor and make the motor run smoothly and efficiently. ▶High Safety: The vibrator adopts double insulation, and the stator has reached the F-class insulation level through a special vacuum dip coating process, which can provide higher safety for your operation. ▶Easy to Carry: The detachable design and lightweight (17.2 lbs) of this vibrator make it easy to carry. You can easily take it anywhere you need to work. Details ●External Carbon Brush Holder: The external carbon brush design allows for easy and quick replacement of carbon brushes, making the maintenance of this product more convenient. ●Screw Joint: The shaft and the machine body are connected by a screw joint, which makes them more stable and not easy to loosen. ●Long Shaft: The 6.6 ft-long shaft is easy to use and can effectively expand your working range. It can be used for consolidating large-volume cement. Application It is applicable to consolidate cement and remove all the trapped air bubbles to give you the toughest cement, and is widely used in commercial concrete, bridges, port construction, large dams, hydroelectric power plants, transportation, water conservancy, port, mine and metallurgy, high-rise building foundation pouring piles, dense steel mesh concrete walls and large, medium and small construction projects, patching and other repair jobs, etc. Specification Material: Aluminum, Plastic, Copper Color: Red Process: Pouring and Vacuum Dip Coating Assembly Required: Yes Power: 1100W Plug Standard: EU Standard Voltage: 220V 60Hz Power Source: Corded-electric Item Package Quantity: ‎1 Power Cord Length: 2m/6.6ft Vibration Frequency: 160Hz Max. Swing: 0.55mm Gross Weight: 8.5kg/ 18.74 lbs Net Weight: 7.8kg/ 17.2 lbs Motor Size (L*W): 31.8*15.5cm/12.5*6.1in Handle Length: 11.8cm/4.6in Length of Vibration Rod: 2m/6.6ft Rod Head Size (φ*L): 3.5*45cm/1.37*17.7in Nut Height: 4cm/1.57in Package Size: 68*45*10cm/26.77*17.72*3.94 in Package Included 1 * Electric Concrete Vibrator 1 * Vibration Rod 1 * English Manual All Accessories for Installation Notes 1. After the power is turned on, if the concrete vibrator does not produce vibration, you can generally knock the end of the shaft to the ground. Please be sure to use the side of the rod head to knock the floor or the shell bar, or you can swing the head of the stick for a little while and it will start to vibrate. 2. When the concrete vibrator works, the concrete vibrator should be inserted into the concrete vertically or at an angle. After vibrating for a certain period of time, the concrete vibrator should be pumped up and down when vibrating. 3. After working continuously for 1-2 hours, the vibrating rod should stop for a while to prevent the machinery from heating up too much and damaging the machine parts. 4. After using it for a period of time, the vibrating rod should be checked to see if the threaded connection of the rod head is loose to prevent the mortar water from penetrating into the rod, causing the vibrating rod not to vibrate. 5. Products with electrical plugs are designed for use in the EU. Please check compatibility before purchasing.
  • Fruugo-ID: 373610951-809148977
  • EAN: 733835964260

Produktsicherheitsinformationen

Bitte beachten Sie die unten aufgeführten spezifischen Produktsicherheitsinformationen für dieses Produkt

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Produktsicherheitsetiketten

CE Mark

Lieferung

Versand innerhalb von 24 Stunden

  • STANDARD: CHF 44.99 - Lieferung zwischen Fr. 26 Juni 2026–Fr. 03 Juli 2026

Versand von Deutschland.

Rückgabe

Wir tun unser Bestes, um dafür zu sorgen, dass die von Ihnen bestellten Produkte vollständig und gemäß Ihrer Spezifikationen an Sie geliefert werden. Wenn Sie allerdings eine unvollständige Bestellung oder Artikel erhalten, die sich von den bestellten unterscheiden, oder es einen anderen Grund gibt, warum Sie mit Ihrer Bestellung nicht zufrieden sind, können Sie die gesamte Bestellung oder einzelne darin enthaltenen Produkte zurücksenden und eine vollständige Rückerstattung für die Artikel erhalten.

Vollständige Rückgaberichtlinie ansehen

Details zur Produktkonformität

Bitte beachten Sie die unten aufgeführten Konformitätsinformationen zu diesem Produkt.

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Hersteller:
Es folgen die Kontaktdaten für den Hersteller des jeweiligen Produkts, das auf Fruugo verkauft wird.

  • CHENGDU KANGTEEN TECHNOLOGY CO., LTD.
  • CHENGDU KANGTEEN TECHNOLOGY CO., LTD.
  • 1ST FLOOR, NO. 88 ZHANGJIA LANE HUAYANG STREET, TIANFU NEW DISTRICT CHENGDU, SICHUAN PROVINCE, CHINA
  • CHENGDU
  • CHINA
  • 610000
  • [email protected]
  • 18215632326
  • http://www.kanten.cn/lianxiwomen.html

Verantwortliche Person in der EU:
Es folgen die Kontaktinformationen für die verantwortliche Person in der EU. Die verantwortliche Person ist der benannte Wirtschaftsteilnehmer mit Sitz in der EU und verantwortlich für die Compliance-Verpflichtungen in Verbindung mit dem jeweiligen Produkt, das in die Europäische Union verkauft wird.

  • E-CrossStu GmbH
  • E-CrossStu GmbH
  • IT-E-CrossStu GmbH Felix-Dahn-Str 4,Stuttgart 70597 Germany
  • Stuttgart
  • Germany
  • 70597
  • [email protected]
  • -71191222020