Features Pure Aluminum Material: Made of pure aluminum material, anti-corrosion, anti-rust, not easy to deform and more durable Convenient installation: This is a convenient installation of the air distribution outlet, no air leakage, good sealing Application: Widely used for engineering projects such as factories, automation equipment, auto repair, electronics and electrical engineering Simple Structure: Adopts the simple structure, compact size, lighter weight, and easy installation and discharge Compatible Equipment: The manifold manifold is mainly used for air pumps, cylinders, compressors, vacuum motors, etc. Specification: Item Type: Pneumatic Manifold Splitter Material: Aluminum Compressive strength: 1.0MPA (10kgf/cm) Working pressure: 0~0.9 MPa (0~0.92 kfg/cm²) Adaptation temperature: 0~60℃ Model Overall Length (Approx.)Way Count Holes Count Length x Width (Approx.)Thread SpecificationsIntersection Center Distance (Approx.)AL-265mm/2.56in2 Way 5 Holes20x20mm/0.80x0.80inG1/4(12mm)30mm/1.18inAL-3 95mm/3.74 inch 3 way 6 holes 20 x 20 mm/0.80 x 0.80 inch AL-4 125 mm/4.92 inch 4 way 7 holes 20 x 20 mm/0.80 x 0.80 inch AL-5 155mm/6.10" 5 Way 8 Holes 20 x 20mm/0.80 x 0.80" AL-6 185mm/7.28" 6 Way 9 Holes 20 x 20mm/0 .80 x 0.80" AL-7 215mm/8.46" 7-speed 10 holes 20 x 20mm/0.80 x 0.80" AL-8 245mm/9.65" 8-speed 11 holes 20 x 20mm/0.80 x 0.80in Package list: 1 x Pneumatic Manifold Block Splitter Note: 1. Do not pull out and plug in the gas pipe frequently during the use of the connector, which will affect the service life of the connector and the gas pipe2. The tube inserted into the joint must be inserted to the bottom of the joint to avoid the possibility of air leakage3. When pulling out the gas line, first make sure that there is no pressure in the pipe, squeeze the end caps of the connection to the end and pull out the gas line Package List 1 x Pneumatic Manifold Block Splitter