Features 304 Stainless Steel This float level controller is made of excellent 304 stainless steel, acid and alkali resistant, high temperature and erosion resistant, with good material and long service life. Manually Adjustable This float level controller is manually adjustable by using a vise to remove the circlip under the float switch, and then adjusting the direction of the float. Wide Application This float level controller can be widely used in water dispensers, hot water dispensers, solar energy, air conditioners, humidifiers, coffee machines, small refrigerators and other water heating equipment to prevent dry combustion water level sensors, etc., in cars. , industrial equipment, agricultural equipment, household appliances in a wide range of applications. Easy to Install This float level controller is very easy to install, you only need to screw the threaded port of the controller to the place where it needs to be installed. Two High Temperature Resistant Wires This float level controller has two high temperature resistant wires that have good resistance to acids, alkalis and fungi and good resistance to many types of grease to ensure a long service life. Specification: Item Type: Float Level Controller Material: 304 stainless steel. Basic parameters: Stroke: approx. 10 mm/0.39 inches. Measuring medium: water, oil alcohol density greater than 0.8 Operating voltage: 0-220 V. Operating current: 0.5A-1A. Average temperature: -20℃-120℃ Operating temperature: 0℃-120℃ Maximum temperature resistance: 120°C Working pressure: 1Mpa Maximum pressure resistance: 5Mpa Maximum power: Low pressure: 10W High pressure: 50 W. Maximum switching current: low voltage: 0.5A, high pressure: 1.5A Package list: 1 x Water Level Sensor Switch Note: 1. The float is made entirely of 304 stainless steel and the clip spring is made of 316L. 2. Low voltage means the float switch can be used for DC voltage circuits from 0 to 110V. 3. High voltage means the float switch can be used for AC 0-220V and DC 0-200V circuits. 4. High temperature means the float switch can withstand temperatures up to 120 degrees for a long time. 5. White silicone high temperature line is for high temperature and high voltage, ordinary black line for low voltage. 6. Float switches cannot directly control solenoid valves or high-power relays, AC contactors, etc.Add a small relay for conversion. 7. The stroke of the floating ball is 10mm, that is, the control range is 10mm. If the control range is large, you can have 2 combinations, 1 long installation and 1 short installation. Package List 1 x Water Level Sensor Switch