Description:Can be bent without kinking or collapse, Bender's calibration mark can be bent 45˚ to 90˚. Lightweight and hand-held design, it is more convenient and quick to use, saving time and effort. Suitable for 1/8 inch (3mm), 3/16 inch (4mm), 1/4 inch (6mm) small tubes. Suitable for automobile fuel pipes and air-conditioning refrigerant pipes. It is also suitable for bending round copper tubes, aluminum tubes and copper tubes. Processed with high-quality materials of aluminium alloy, wear-resistant, high-temperature resistant, and have a long service life. Specification:Item Type: Tube BenderMaterial: Aluminium AlloyColor: BlueBending radius: 0-120°Reference mark: 45-90°Application: Suitable for small pipes of 1/8 inch (3mm), 3/16 inch (4mm), 1/4 inch (6mm), such as automobile fuel pipes and air conditioning refrigerant pipes. It is also suitable for bending round copper tubes, aluminum tubes and copper tubes. How to Use:1. Raise the handle of the pipe bander and position tubing in the correct channel size. Be sure the top surface of the tubing makes with the support.2. Mark on the pipe where you needthe bend, making sure"0"on the handle is in line with o, slowly lower the handle until the "o"aligns with the desired angle.3. If you need the bend to be to the left of the marked position, align the mark on the pipe to "L", and repeatthe motion needed to bend the pipe. right of the mark, position the mark on the pipe to "R". Package Includes:1 x Tube BenderNote:1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.2. Please allow slight manual measurement deviation for the data.