Description:Triangular Fine Serrated Vertical Stripe Geometric Candle MoldProduction Steps:Preparation Materials: soy wax, white beeswax, mold, wax threads, plasticine, wax melting furnace, wax crucible, wax thread holder, paint, mixing spoon1: put the wax line on the mold and connect the holes with plasticine2: weigh the weight of the wax required for the mold (in the ratio of soy wax and beeswax 1:1), put it on a wax melting furnace and heat it until melted3: add paint to the wax liquid at about 90 degrees, stir evenly and pour into the mold4: about an hour after entering the mold, the candle will be sunk, cut off the excess wax line and add a layer of wax liquid of the same color5: after waiting about 4 hours to cool completely, touch the mold pouring wax onto the hard surface properly to release the moldCommon reasons why candles don't unpack well:1. The wax material used is incorrect, and the pc mold cannot be made of pure soy wax, jelly wax.2. Candles are made before they are completely cooled, generally at least 4 hours. The larger the size and warmer the weather, the longer the cooling time will be. Specification:Product Name:Candle MoldMaterial: PCSstandard Size:A: SmallMold: About 13.5*6.7cm/5.3*2.6inFinished Product: About 12*6.1cm/4.7*2.4inB: BigMold: About 16.5*9.1cm/6.4*3.5Finished Product: About 14.5*8.5cm/5.7*3.3inPacking List:1*Candle Mold