R410A R22 Peeler Valve Agent Removal Tool Assembly Tool Air Conditioner Repair Tool With Dual Size SAE 1/4 Inch 5/16 Inch Port For HVAC System Feature:1. For removing and installing reels in live systems. Quick and easy replacement of leaking spools. Double size for R410a or R22 charging systems or other retrofit systems.2. Excellent workmanship: Peeler Valve Center Remover installation tool is made of solid brass, which is durable and not easy to rust; The metal knob is designed with anti-slip knurling, which is durable and can be used for a long time.3. Time-saving: basic tool, easy inner valve insertion, core control, no need to stop or release refrigerant, easy to disassemble and install the valve core, save hours of draining and charging. Specification:Items: Reel Removal Tool, R410a Reel Removal Tool, R22 Reel Removal Tool, a/c Reel Removal Tool, HVAC Valves, Reel Remover, Schrader Remover Tool, Pressurized Small Split System Refrigeration Air Conditioning. Service Ports: 1/4 inch and 5/16 inch female SAE thread Bypass Port: 1/4 inch male SAE thread Color: Yellow Material: Copper Package Size: About 180*115*30mm/7.09*4.53*1.18 inch Basic Operation of Valve Core Remover Key:1. Pull out the dead center on the valve stem, close the valve on the tool, adjust the connection between the tool and the air conditioner interface, and tighten the valve on the air conditioner.2. Make sure the tool is tightly connected to the air conditioner valve, then open the valve on the tool. Push the valve stem into the air conditioning valve and gently turn the rear remover knob. Find the angle at which the spool is attached and release it.3. After removing the valve core, pull out the valve stem, close the valve on disassembly, loosen the screw at the end of the tool, and remove the valve core. Get the work done! Note: It is recommended that you close the reel key valve and disconnect the internal connection of the air conditioner before removing the reel. Due to the different monitor and light effect, the actual color of the item may be slightly different from the color showed on the pictures. Please allow 1-2cm measurement deviation due to manual measurement. 1 * Remover Installer1 * Remover Remover10 * Reel