Features Isolated Measurement Circuit: The measurement circuit is isolated from the incoming sign, providing defence by withstanding 30 times the nominal input, preventing damage from instantaneous high current access. sign Isolation and Noise Filtering: The product effectively isolates the detection sign and the output sign, enhancing the sign-to-noise ratio and stability, improving anti-interference ability. Highly Insulated and Compact Design: The primary and secondary sides are highly insulated and isolated, with high accuracy, small size, low power consumption, wide frequency response, and anti-interference characteristics. Convenient Installation: Perforated input with no insertion loss, fixed with standard guide rail and flat screws, offering convenient installation. Wide Application: Suitable for various industries such as generators, motors, power distribution cabinets, air conditioners, power grid monitoring, and railway system sign monitoring. Features: 1、The measurement circuit is isolated from the incoming sign. Hall？type current conversion can withstand 30 times the nominal input, prevents instantaneous high current access and burns out the internal components of the sensor 2、The product can isolate the detection sign and the output sign, effectively filter the noise in the sign, greatly improve the sign？to？noise ratio and sign stability of the product, and effectively enhance the product's anti？interference ability 3、The primary and secondary sides of the hole current transmitter are highly insulated and isolated, possess high accuracy, small size, low power consumption, wide frequency response, and anti？interference characteristics 4、Perforated input, no insertion loss, fixed with standard guide rail and flat screws, convenient to install 5、Suitable for generators, motors, intelligent low？voltage power distribution cabinets, air conditioners, fans, street lamps, power grid monitoring, motor sign monitoring, railway system sign monitoring industries and other load current intelligent monitoring systems Specification: Item Type: AC Current Transmitter Material: ABS Power Supply: DC24V Installation Method: Standard rail + flat screw fixation Product Use: Used to measure AC current, especially for power frequency 50Hz sine ripple AC current Rated Current: AC0-50A Rated Output: DC4-20mA Load Capacity: Voltage Output: 5mA; Current Output: 6V Accuracy: 0.5% Overload Capacity: 30 Times the nominal input Isolation withstand Voltage: 2.5KV/50Hz, 1Min Offset Voltage: ≤10mV Temperature Drift: ≤500PPM/℃ Linearity: 0.1% Frequency Bandwidth: 20-5KHz Current Consumption: between15mA+ output current Response Time: between200ms Working Temperature: -109℃~+70℃ Storage Temperature: 25℃~85℃ Package List: 1 x AC Current Transmitter Note:</ Package List 1 x AC Current Transmitter