3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V This 3500W electric water heater is made of stainless steel and features an automatic immersion design for safe and efficient heating. Suitable for use in bathtubs, buckets, inflatable swimming pools, fish tanks, plastic barrels, and other water containers. The heater is designed to float and can be positioned in the water by adjusting the power cord. Ensure the water level is at least 2530 cm to allow proper submersion of the heating element. The heating pipe must be fully submerged in water during operation to prevent damage. For added safety, especially with inflatable or thin-walled containers, place a ceramic object under the heating pipe to avoid direct contact with the container surface. To use, fill the container with water, place the heater in the water, and plug in the power. The indicator light will turn on, and small bubbles will form around the heating pipe as the water begins to heat. For large volumes of water, unplug the device halfway through heating and check the temperature before continuing. Once the desired temperature is reached, unplug the power, wait 20 seconds, then remove the heater before using the water. Do not touch the water during heating. Always unplug the device before handling or removing the heater. Specifications: - Type: Electric Water Heater - Model Number: Electric Water Heaters - Power: 3500W - Cable Length: 1.5m - Voltage: 220V 50Hz - Material: Stainless Steel + PP Plastic Safety Notes: - The metal heating tube must be completely submerged in water during use. - Do not use the heater outside of water or while in contact with water. - Do not touch the water during operation. - Always unplug the device before removing the heater. - The stainless steel ball must be fully submerged to avoid damage. Package Includes: 1 x Heater (Adapter will be provided based on destination country)