1. Water-proof and Dust-proof: The WSDT-60A brushless RC 60A ESC suitable to all-weather sport races; (Note: please uninstall the cooling fan before using this ESC in water; Clean and dry it soon after the use for avoiding the connectors get rusty.) 2. External Programming Port: Easy to connect to the Program Card when setting the ESC 3. Multiple Protections: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor lock-up protection 4. Performance: Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment; 9 steps of acceleration(punch) adjustment from "soft" to "Very aggressive" to fit for different kinds of models, tires and tracks 5. Application: This WSDT-60A brushless ESC suitable for 1/10th short course trucks, buggies, trucks, and . The built-in switch mode BEC with a maximum output of 6Amp and voltage of 6V make this RC Brushless ESC compatible with servos Name: SENSORLESS BRUSHLESS ESC FOR CAR Model: HG60A Cont. Current: Fwd. 35A / Rev. 35A Current: Fwd. 105A / Rev. 105A Resistance: 0.0015 Cars Applicable: 1:18 On-road/Off-road// Motor Limit: For 2S Lipo or 6 cells NiMH: On-road: 3656-size or smaller motor with the KV Less than 6000 Off-road//: 3656-size or smaller motor with the KV Less than 4000 For 3S Lipo or 9 cells NiMH: On-road: 3656-size or smaller motor with the KV Less than 4000 Off-road//: 3656-size or smaller motor with the KV Less than 3000. BEC Output: 5.85V/3A Cooling Fan: From battery directly without regulating The stock fan can work with 2S and 3S Lipo Color: As Shown Material: plastic Package Contents: 1 x Brushless Esc For Car 1 x English instruction manual Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.