Set of 7 straight woodworking bits — 8mm shank, sizes range from 6mm to 20mm Key benefits One kit for many tasks: seven straight end trimmers spanning 6mm–20mm cover common groove, slot, and trimming sizes so you can finish jobs without hunting for individual bits. Accurate, clean results: designed for straight cutting and flush trimming to deliver precise edges and consistent cuts across panels and edges. Stable and compatible: 8mm shanks fit routers and trimmers with an 8mm collet for secure mounting and reduced vibration during use. Time and material saving: use the right diameter for the job to minimize material removal, reduce sanding, and speed up fitting and assembly. What it does (functions) Flush trimming and trimming of edges and laminates to the substrate. Cleaning out grooves, dados, and mortises after rough cutting. Plunge cutting and straight routing for slots and shallow recesses. Straight end trimming where accurate, square-cut ends are required. Important attributes Shank size: 8mm — compatible with routers/trimmers that accept 8mm collets. Bit range: seven pieces covering diameters from 6mm up to 20mm for flexibility across projects. Use: straight end trimmers for cleaning, trimming, slotting, and flush work. Performance: engineered for precise, efficient cutting and repeatable results. Practical use scenarios Laminate or veneer finishing: flush-trim excess laminate to the substrate for edge-ready panels without damaging the workpiece. Joinery cleanup: remove remaining material from dados and mortises and square up joints before assembly. Slot and groove routing: cut or clean straight grooves for shelving, hardware, or inlay work with controlled depth and clean walls. Usage tips Secure the workpiece and choose the correct bit diameter for the fit required. Match router speed and feed rate to the material; take multiple light passes for deeper cuts. Inspect shank and collet for tight fit before use to maintain cutting accuracy and safety. This 7-piece set provides a practical selection of straight end trimmers with an 8mm shank and a 6mm–20mm size range, ideal for precision cleaning, flush trimming, and a variety of standard woodworking tasks.