Features 1,Mainly used for bonding various dental orthodontic accessories. 2,Easy to use, less waste, independent operation and other advantages. 3,Has high clinical bond strength, high efficiency and convneient to use. 4,Wonderful new - generation enamel adhesive resin, complete accessory. 5,There are 2 different types available, you can choose by your needs. Specification Condition: Item Type: Orthodontic Dental Adhesive Optional Type: Large Set, Small Set Material: Plastic Service Life: 18 Months Storage Condition: Keep below 25℃ (do not freeze) Suitable for: All kinds of dental orthodontic attachment adhesion Main Technical Performance Index: Curing time not more than 3000 adhesive shear strength MPa>17.2 Usage: 1. Tooth preparation: cleaning the enamel surface of the teeth, remove dirt on the tooth surface, rinse the teeth thoroughly with water, isolate the teeth, and blow dry the tooth surface with oil-free and moisture-free air gun. 2. Acid-eroded tooth surface: apply the acid-eroded agent on the tooth surface, rinse thoroughly with water after 50-60 seconds, blow dry, and the tooth surface after acid-eroded is chalky. If there is no chalky appearance, the acid etching time is prolonged. 3. Primer: brush a thin layer of liquid on the etch surface of the teeth with a bristle brush, and brush a thin layer of liquid on the bonding surface of the brackets with another bristle brush (wet is enough). 4. Bonding: apply a small amount of paste with the mixing rod to the adhesive surface of the grooves coated with liquid agent to form a thin layer. Glue the bracket and the tooth surface immediately after applying the paste. Adjust the position of the bracket within 20 seconds, and press slightly for 5-10 seconds to prevent the bracket from sliding. Remove excess liquid and paste after 40-60 seconds. After curing for 5 minutes, orthodontic operation can be performed Package List 1 x Paste 3.5g 1 x Etching Agent 2.5ml 1 x Liquid Agent 8ml 7 x Brush Head 1 x Needles 1 x Mixing Pen