1.Nail & Set Punch for Professional Wooden Ship Model Kit,Special tool for model ship kit. when you made the first layer of the hull , you can use the pin to fix for temporarily and pull out when the glue dry. 2.there are many part need use this type of tool to insert the copper nail, generally need pre drill a hole which smaller than nail for 0.1 mm, then put the nails in, this tool are much easier use than hammer. 3.Give wood projects a clean & neat professional finish, essential for trim, cabinet & furniture work 4.Nail set punches let you set/sink nails and brads without damaging surrounding wood 5.All metal production, Aluminium, oxidation black treatment, the back end can be swirled, easy to adjust the length of the top wire. The front end with a positioning ring to facilitate the control of the depth of pressure Note: Because this tools upgrade frequently . the wood color maybe different with the pictures , Hope you can understand . Note:Installation guide not included, Please check as much as possible to make sure the item is what you need. Tips: The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use Color: As Shown Material: Metal Package Contents: 1 x Nail pressing tool Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.