Feature: 1. [IPX8 Waterproof and Safe Work] This new water pump specially designed for fish tank, aquarium and fountain has IPX8 waterproof, 12V low voltage, more safety, brushless DC motor, good insulator can work more safely in different scenes. 2. [Novel and Reasonable] The design of the submersible pump is novel and reasonable, and the humanized design: the main part is enlarged to grasp the particles, which is more effective to prevent the falling accident due to slipping; the main part is disassembled without tools, which is easy to clean and maintain. 3. [Durable and Multi Caliber] The pump core of this Amphibious Pump adopts ceramic shaft and silicone sleeve, which is wear resistant and has a longer service life. The inlet and outlet use multi diameter faucets to solve the problem of free replacement of original parts. 4. [Portable and Noise Free] Small and portable, suitable for travel. The internal motor does not produce noise and has stable performance. 3 strong suction cups on the bottom of the pump help hold it in place so you can stick it vertically or horizontally on the right side of the aquarium. 5. [Scope of Application] This water pump kit is specially designed for freshwater, salt water, and can be applied to small and medium aquariums, fish tanks, backyard fountains, waterfalls, small water features, table fountains, water gardens and small pond. Can be used for rockeries, garden statues and irrigation systems. Specification: Item Type: Submersible Pump Material: ABS Rated Voltage: DC12V Rated Power: 10W Features 1. The design of this product is novel and reasonable, and it has many humanized designs: the main part has a grip pattern, which can more effectively prevent the accident of the water pump from falling due to slipping; the main part can be disassembled and assembled without tools, which is convenient for cleaning and maintenance. 2. This product is all made of ceramic shafts and silicone sleeves to ensure more wear-resistant and longer lasting Service life, freshwater and sea water can be used. 3. The water inlet and outlet are taken over by multi caliber water nozzles, which solves the problem of free replacement of original parts. 4. This product has the function of self-stop protection from water. 5. The water pump is suitable for aquarium accessories, rockery and flowing water landscaping, handicraft landscaping, and circulating water supply and drainage for aquariums.. Package List: 1 x Submersible Pump1 x Water Inlet2 x Water Outlet3 x Suction Cup1 x Gasket Note: 1. In order to ensure product performance, it is forbidden to run the pump without water for a long time.2. Pay attention to waterproofing where the power cord connector is suspended or placed to isolate water splashes3. When installing or disassembling and cleaning the water pump, the power supply must be cut off to ensure safety.4. This pump is only suitable for water above 0℃ and below 35℃, otherwise it will cause damage to the pump5. If the power cord is found to be damaged, it is forbidden to use it, and it is forbidden to replace it by yourself.WARNING: Failure to follow the instructions below may result in injury to your safety or pets, damage to the machine