You will receive two rolls of green fluorescent tape in your package, with the dimensions of 20mm x 5m and 10mm x 5m, and look forward to your own DIY to bring you a convenient life. The green luminous tape can adhere well to metal, wood, plastic, glass and whitewashed walls, quickly repair the charge, and keep it bright and clear for a long time. The scope of application is very wide, and it can be used on the garage control board. When the door opener lamp is off at night, turn on the plug, the door and the shelf, and you can easily find the light switch. Product You get: 1 roll of 5m*20mm green fluorescent tape 1 roll of 5m*10mm green fluorescent tape Product name: green fluorescent tape Material: PET Green color Note: Building must be done on a flat surface, the construction temperature should be 10-40. The electroluminescent film can be cut into various shapes. And directly attached to the place for the decoration and instructions (such as telephones, switches, etc.). Screen printing patterns, text and other methods on the surface of the luminescent film form a substrate for emitting light. When sticking to the surface of the object, you should clean the surface first. And there should be no oil or dust on the surface. The glow film has certain thermal expansion and contraction properties. The glow film after slicing cannot be placed at will. It must be squeezed or compressed to prevent deformation and curling. During use, please remove the release paper on the back of the glow film. Features: It is suitable for table water in the garage, so when the open door light goes out, you can easily find the light switch. Its great for hanging out in the kids room or marking a hazard in workshop. Apply tape to the dogs collar so you can easily find it in the dark. Its easier to find them when you put them on on the key, then look around in your wallet, so they are both convenient and practical.