The flame torch is very convenient to use, and can be used for metal welding or pipe thawing or outdoor barbecue or cake baking or air conditioner refrigerator copper pipe processing or (singeing) or household maintenance and so on. Welding Instructions:With universal copper-aluminum flux-cored welding wire (not tin welding wire), it can be used for welding and repairing copper, aluminum, iron, stainless steel and other household metal products, but it is not suitable for welding cast iron, cast copper and other hard and thick castings. Step 1: Before welding, the welding joint must be clean and free of dirt and oil. : Welding base metal (welding parts) must be heated to 350-400 and then place the welding wire at the welding port for welding (do not burn the base metal red or do not heat it). Note: If the welding wire does not stick after melting, it is because the base metal is not heated enough. The temperature of this welding torch can reach 1300 . Tips: The product may be updated constantly, The Actual Product May Have Slight Differences Or Color Differences the color and appearance may be changed, please don't mind. And take a consideration before place the order if you have request for color or appearance. Colour:blue Material:Rubber and copper Package Contents: 1 x Propane Torch Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.