NEW Car Triangle Reflective Tripod Emergency Breakdown Warning Reflective Sticker Safety Hazard Foldable Stop Sign Accessories _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ Car Triangle Reflective Tripod Emergency Breakdown Warning Reflective Sticker Safety Hazard Foldable Stop Sign Car Accessories _x000D_ [product introduction] _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ When a car is driving on the road, it is inevitable that it needs to stop at the side of the road in an emergency. This thing is useful at this moment. No matter during the day, at night or when the weather is bad, just put it a few meters behind the car to warn the car coming from behind in advance. Because it is reflective, the light warning board is very bright and eye-catching at night and can be seen from a distance. Folding reflective triangle warning signs can be folded together when not in use, and are convenient to carry; when in use, the folding reflective triangle warning signs can be opened and placed behind a car, and are safety articles for driving out. _x000D_ _x000D_ [Instructions for Use] _x000D_ _x000D_ 1,When using, take out the faulty car warning sign from the box, hold the bottom with your hand, and open the support on both sides of the bottom. Place the opened sign on the ground, pull up the left and right reflectors, and insert the pin on the left reflector into the open groove bottom of the right reflector. _x000D_ _x000D_ 2,The reflective surface of the open fault warning sign is placed in the direction of the vehicle behind the faulty vehicle. The vertical angle of the sign is 5' to the left of the vertical plane of the vehicle, and the Common road is placed 30 to 100 meters behind the faulty vehicle. The highway is placed 100 meters behind the faulty car _x000D_ _x000D_ 3. When stopping use, withdraw the left and right reflector plates and supporting feet in the reverse order of the opening, and then put them into the packaging box. Pay attention to protect the red reflective surface and fluorescent surface when collecting signs, and avoid scratches. When connecting and disconnecting the left and right reflector plates, push or pull them along the direction of the groove to avoid damaging the sign plate. [The package includes:] _x000D_ 1PCS x Car Foldable Reflective Tripod _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_