For DJI Osmo Pocket 3 HD Waterproof Case Camera Underwater Protective Cover 1. High definition and high transparency, shockproof and pressure-resistant, fully invisible, 45-meter waterproof guarantee 2. Optical glass, clear and bright. Enhances texture, light transmittance is greater than or equal to percent 95, the colors on the front and rear screens remain clear and vivid when viewing and replaying 3. Hard shell, in the face of complex underwater environments, accidental collisions are not to be worried about, it can effectively protect the main unit 4. 316 stainless steel buttons with significant touch sensation, resistant to seawater corrosion 5. Real machine mold, the waterproof case has a higher fit with the camera 6. Shock-absorbing gaskets, protect the camera from external force impact 7. Suitable for DJI Osmo Pocket 3 8. IP rating: IP68, supports a water depth of 60 meters 9. Lens material: tempered glass, light transmittance is greater than or equal to percent 95, high hardness greater than 9H 10. Materials: PC + 316 stainless steel + tempered glass 11. Size: about 18.4 x 7.5 x 5.8 cm 12. Weight: about 160g Notes for attention 1. Before submerging, please check whether all components of the product are intact 2. Before submerging, please check if the position of the rear door gasket is correct and ensure that there are no obvious impurities on the gasket 3. Before submerging, make sure the waterproof rear door is properly closed and the locking mechanism is securely locked 4. After the application is completed, please rinse the shell with clean water to prevent long-term erosion by seawater 5. The product should be stored in a cool, ventilated and dry place. The storage temperature should not exceed 40 degrees