One-handed Solder Sucker: and compact,plunger is within reach of thumb, perfect for one-hand operationPerfect Structure:Metal body and high pressure vacuum, this desoldering pump can help you suck the solder effectively. Built-in self-cleaning shaft to prevent cloggingMaterials:Flexible heat resistant silicone nozzle withstands direct contact with soldering iron tip without brokenSpare Tubes:Comes with 50 mm spare silicone tubeWidely Used: Desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the circuit board, etc. To meet your soldering needsHow to Use the Desoldering PumpStep 1: Press the press head down until it is been locked and you will hear a click;: Heat the solder join t with your soldering iron and allow the solder to become fully liquid;Step 3: Move the nozzle of the pump to the molten solder. Move the iron tip out of the way and immediately cover the liquid solder puddle with the pump's nozzle . Press the release button.Step 4: Repeat this process if necessary.Suck the Solder EasilyThe solder sucker measures 153x20mm , which will fit your hands perfectly no matter if you are left-handed or right-handed. With metal body and high pressure vacuum, this desoldering pump can help you suck the solder effectivelColour:As ShownMaterial:MetalPackage Contents:1 x Solder SuckerOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.