SMART SENSOR Pipeline Hidden Wire Fault Detection Underground Cable Detector 1. Scientifically designed function buttons for easy operation. 2. Streamlined, ergonomically designed body for a comfortable, non-slip grip. 3. The receiver battery compartment accepts six 1.5V AAA batteries; the transmitter accepts 9V batteries (not included). 4. The transmitter has a stand for convenient measurement. 5. Locate fusessockets, locate and trace wires in electrical installations, branch outlets, and switch boxes. 6. The receiver LCD has a backlight for easy use in dimly lit environments and supports flashlight illumination. 7. Locate openshort circuits in electric floor heating systems and accurately detect the path of underground water and gas pipelines. 5.1 Transmitter technical parameters: 1. Output signal: 125 kHz 2. External voltage detection range: DC 12-400 V; AC 12-400 V (50-60 Hz): 3. Temperature Measurement Specifications: 2.5°C 4. Display: LCD with function display and bar graph 5. External voltage dielectric strength: 400 V ACDC 6. Overvoltage category: CAT III 300 V 7. Pollution degree: 2 8. Power supply: 1 x 9V, IEC 6LR61 9. Current (MIN): approximately 31 mA 10. Current (MAX): approximately 115 mA 11. Fuse: F0.5 A 1000 V, 6.3 x 32 mm 12. Altitude (MAX): 2000 m 13. Dimensions: 190 x 89 x 4 mm 14. Weight: approximately 360 g 5.2 Receiver specifications: 1. Tracing depth: depends on the medium and specific application 2. Cable locating mode (monopolar application): approximately 0 to 2 m 3. Cable locating mode (bipolar application): approximately 0 to 0.5 m 4. Cable locating mode (single loop): Up to 2.5 m 5. Grid voltage identification: approximately 0 to 0.4 m 6. Display: LCD with function display and bar graph 7. Power supply: 6 x 1.5 V AAA, IEC LR03 8. Current consumption (minimum): approximately 32 mA 9. Current consumption (maximum): approximately 89 mA 10. Altitude (maximum): 2000 m 11. Dimensions: 24.5 x 78 x 3