Barometer: The current barometric pressure will be displayed on the screen immediately after power on. Press the [ALTI or and] button to switch between barometer and altimeter.Altimeter: The altitude value displayed on the screen after power on is the sea level altitude of the current location. In the altitude display state, press the [SET] and [ALTITUDE or and] keys simultaneously, you can press [and] or [-] to change the current altitude value.Relative altimeter: The use of the relative altimeter is to clear the height value measured at this time, and use the position at this time as the 0M height point, and the height value rising or falling from the 0 height point is the relative height value.The method for resetting the altitude value is to press and hold the [ALTI or and] button until 0M is displayed at the bottom of the screen, and then start to move, and the relative altitude value of the move will be displayed on the screen. Press and hold the [ALTI or and] button again to switch back To the actual height value.Weather forecast: It can predict the weather conditions in the next 12 to 24 hours when it is turned on, and the effective range is 30-50KM.1. Long press the [SET] button for 2 seconds, 24Hr flashes, press the [ALTI or and] button to switch between 24Hr or 12Hr2. Press the [SET] button to enter the time setting, at this time the hour digits flash, press [ALTI or and] or [-] to set the hour value3. Press the [SET] button to flash the minutes, press [ALTI or and] or [-] to set the minutes4. Press the [SET] button to flash the calendar year number, press the [ALTI or and] or [-] button to set the year value5. Press [SET] button to flash the calendar month number, press [ALTI or and] or [-] button to set the month value6. Press the [SET] button to flash the calendar date number, press the [ALTI or and] or [-] button to set the date value7. Press the [SET] button to flash the temperature unit Celsius, press the [ALTI or and] button to switch between Celsius or Fahrenheit8. Press the [SET] button and the air pressure unit HPA flashes, press the [ALTI or and] button to switch to the air pressure unit HPA or inHg or mmHg9. Press the [SET] button to flash the height unit M, press the [ALTI or and] button to switch between the height unit M or FEET10. After the setting is completed, press [HISTORY] to exit the setting state, or automatically exit the setting without doing any operation within 10 secondscolour:Black greyMaterial:ABSsize:9 x 5 x 2cmPackage Contents:1 x altimeter barometer1 x English manual1 x CR2032 button battery (not included)Only the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.Products from GuanGuan's store Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.