DIY 5Gbps PCI-E 1X to USB 3.0 PC Front Panel 4 Ports USB PCIe HUB Adapter with PCI Express Riser Card for Floppy Disk Drive Bay _x005f_x000D_ Feature: _x005f_x000D_ 1. Theoretically, the transmission rate can reach 5Gbps, the data transmission is stable, and the office efficiency is improved. _x005f_x000D_ 2. It can be used when installed, supports hot plugging, and can be unplugged directly after the data is transferred. _x005f_x000D_ 3. With the new SATA power supply interface, keyboard/U disk and other devices can be used normally without connection, and the connection can ensure the normal use of large-capacity mobile hard disks and other power-consuming devices. _x005f_x000D_ 4. OD5.5 thick wire, durable, PCIE X1 socket, thick gold finger contact is better. _x005f_x000D_ 5. Small board right-angle design, small area, stable and not easy to fall off, will not grab space with the surrounding graphics card, and will not affect the heat dissipation of the graphics card. _x005f_x000D_ _x005f_x000D_ Specification: _x005f_x000D_ Type: PCI-E 1X to front 4-port USB 3.0 card tray _x005f_x000D_ Chipset: NEC D720201 _x005f_x000D_ Bus mode: PCI-E X1 interface _x005f_x000D_ Compatible slots: PCI-E x1/x4/x8/x16 _x005f_x000D_ USB interface: 4 x USB3.0 ports _x005f_x000D_ Transmission rate: USB3.0 5Gb/s _x005f_x000D_ USB cable length: 60cm/23.62in _x005f_x000D_ Product size: 102x95x25.8mm/4.02x3.71x1.02in _x005f_x000D_ Support system: for Windows XP 32/64, for Windows 7 32/64, for Windows8, for Windows8.1, for Windows10 _x005f_x000D_ _x005f_x000D_ Note: _x005f_x000D_ Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! _x005f_x000D_ Please allow 1-2cm measuring deviation due to manual measurement. _x005f_x000D_ _x005f_x000D_ Included: _x005f_x000D_ 1 X Panel _x005f_x000D_ 1 X USB Cable _x005f_x000D_ 1 X PCI-E 1X Riser Card 1. Theoretically, the transmission rate can reach 5Gbps, the data transmission is stable, and the office efficiency is improved. 2. It can be used when installed, supports hot plugging, and can be unplugged directly after the data is transferred. 3. With the new SATA power supply interface, keyboard/U disk and other devices can be used normally without connection, and the connection can ensure the normal use of large-capacity mobile hard disks and other power-consuming devices. 4. OD5.5 thick wire, durable, PCIE X1 socket, thick gold finger contact is better. 5. Small board right-angle design, small area, stable and not easy to fall off, will not grab space with the surrounding graphics card, and will not affect the heat dissipation of the graphics card.