Specification: _x005f_x000D_ Name: Light Motherboard Synchronous Transfer Cable _x005f_x000D_ Interface: 12V 4pin/5V 3pin (optional) _x005f_x000D_ Colour: Black _x005f_x000D_ Line length: about 60cm/23.62inch _x005f_x000D_ Support motherboard: for Giga/Microstar/A-sus RGB motherboard _x005f_x000D_ Can synchronize light control accessories: radiator, chassis light belt, etc. _x005f_x000D_ _x005f_x000D_ Note: _x005f_x000D_ 1. Please make sure your motherboard is 5V or 12V, do not mix, otherwise it will be damaged. _x005f_x000D_ 2. When connecting, all connections must be arrow to arrows, or arrows to 12V/5V logo, otherwise it will be damaged _x005f_x000D_ 3. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! _x005f_x000D_ 4. Please allow 1-2cm measuring deviation due to manual measurement. _x005f_x000D_ _x005f_x000D_ Included: _x005f_x000D_ 1 x Connector Cable 1. Supported Motherboard: This connector cable is support for Giga/Microstar/A-sus RGB motherboard. 2. Synchronous Lamp Control Accessories: Radiator, chassis lamp belt, etc. 3. RGB Motherboard Synchronous Transfer Cable: Through the RGB connection cable, the RGB motherboard can be connected with the same side of the RGB product to achieve the synchronous light control of the RGB product and the RGB motherboard. Or it has RGB products to control light effects, and the RGB motherboard can control the light effect. After all RGB products are connected, they are either controlled by the RGB chassis or synchronized by the motherboard to control monochrome / breathing / circulation / gradation. 4. Easy to Install: This RGB connector cable is easy and simple to install and remove.