This USB C-to-Dual Canon o cable converts smart devices with Type-C interfaces, such as mobile phones, notebooks, and tablets, into dual Canon outputs, with red indicating the right channel and black indicating the left channel. The output end connects to the XLR input port of power amplifiers, active speakers, and stage sound systems. Note: This product is designed for one-way signal transmission only. The USB Type-C port outputs o signals to XLR; it does not support input from XLR sources. The XLR connectors are intended to connect to compatible input ports on amplifiers, powered speakers, or sound systems, but must not be connected to microphones. The cable features a Y-shaped branch design, with the split located approximately 50 cm from the XLR plug. It integrates a 32-bit/384-kHz DAC chip, offering higher sampling rates, improved o clarity, stronger driving capability, and enhanced signal-to-noise ratio compared to standard 16-bit or 24-bit chips. Output Specifications: - DAC: 32-bit, 384 kHz - DNR @ 1 kHz (-60 dBFS): Typical 100 dB - THD+N @ 1 kHz (500 mVrms): Typical -85 dB - Crosstalk @ 1 kHz (0 dBFS): Typical -80 dB - Dormant current: 1.5–2 mA - Standby current: 25–35 mA - Working current: 40–50 mA - Output impedance adaptation: 8–32 Ω - Output level: 530–630 mV - Frequency range: 20 Hz – 20 kHz - THD+N: -90 to -80 dB - SNR: 95–105 dB - DNR: 95–105 dB - Crosstalk: -90 to -70 dB Color: Black & Red Material: Plastic Length: 3 meters Package Includes: 1 x Cable Note: Light reflection and differences in display screens may cause slight variations between the color shown in images and the actual product. Measurement tolerance: ±1–3 cm.