The Hose 191619mm Tee Type Reducing Brass Barbed Pipe Fitting Reducer Connector is a threeport brass barb fitting designed to create a branch in a hose line while reducing one leg from 19 mm to 16 mm. Its teeshaped design allows you to split flow and route hoses where needed without adding extra adapters. Key benefits Simplifies hose routing with a builtin branch: create a Tconnection and reduce one leg from 19 mm to 16 mm in a single fitting. Durable brass construction: corrosionresistant and longlasting for garden, irrigation, and general purpose water lines. Secure, leakresistant connections: barbed hose ends grip firmly when paired with compatible hose and hose clamps. Versatile for standard hose sizes: designed for standard 19 mm hoses with a 16 mm branch, enabling flexible system layouts. Key attributes Functionality: Tee type reducing connector with two 19 mm ports and one 16 mm port, enabling a branch while maintaining larger main line. Compatibility: Suitable for standard 19 mm hose systems and compatible with 16 mm branch applications; uses barbed hose connections for a reliable seal when clamps are used. Size: 191619 mm threeport configuration. Material: Brass, offering durability and good resistance to wear and corrosion. Performance: Designed for generalpurpose water transfer and irrigation applications where a Tbranch with a reduced leg is required. What makes it unique The combination of a tee shape and a builtin reduction (19 to 16 mm) in a single brass barb fitting provides a compact, reliable solution for branch connections without needing multiple adapters or fittings. Applications and use cases Irrigation systems: split a main 19 mm supply line to feed a 16 mm drip line or sprinkler hose, enabling efficient distribution of water to different zones. Garden hose assemblies: branch from a 19 mm main line to supply a separate 16 mm hose for targeted watering or a mini sprinkler head. DIY projects and smallscale fluid routing: create a convenient Tbranch in a 19 mm hose line while reducing one leg to 16 mm for specialized tubing or fittings in hobbyist setups. Installation notes Ensure hoses are clean and of debris before insertion. Push hoses fully onto the barbs until seated, and secure with appropriate hose clamps to minimize leaks. Avoid excessive bending of hoses at the connections to prolong life and maintain a watertight fit. Maintenance Periodically inspect for signs of wear or loosening and retighten clamps as needed. Clean fittings as part of routine system maintenance to prevent buildup that could affect seal integrity. This fitting provides a practical, durable solution for creating a branched, reduced leg in 19 mm hose systems, backed by brass construction for reliable performance in a variety of water transfer and irrigation applications.