Specification: _x005f_x000D_ Certification: NONE _x005f_x000D_ Origin: Mainland China _x005f_x000D_ Type: Hard Drive Adapters _x005f_x000D_ Model Number: MSATA To NGFF Adapter _x005f_x000D_ SSD interface converter, four mounting holes on the board: 22*30mm, 22*42mm, 22*60mm, 22*80mm. _x005f_x000D_ Size: _x005f_x000D_ MSATA to NGFF: 8 x 3cm/3.1 x 1.18inch _x005f_x000D_ NGFF to MSATA: 9.2 x 3cm/3.6 x 1.18inch _x005f_x000D_ MSATA to NGFF: _x005f_x000D_ External interface: M.2 NGFF interface (NVME, pei-e protocol not supported) _x005f_x000D_ Internal interface: MSATA _x005f_x000D_ NGFF to MSATA: _x005f_x000D_ External Interface: MSATA _x005f_x000D_ Internal interface: M.2 NGFF interface (NVME, pei-e protocol not supported) _x005f_x000D_ _x005f_x000D_ _x005f_x000D_ Note: _x005f_x000D_ Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! _x005f_x000D_ Please allow 1-2cm measuring deviation due to manual measurement. _x005f_x000D_ _x005f_x000D_ _x005f_x000D_ _x005f_x000D_ Included: _x005f_x000D_ 1 x Adapter Card 1. Versatile Compatibility: This MSATA to NGFF adapter card enables seamless conversion between different types of solid-state drive interfaces. It specifically converts MSATA interface to NGFF SATA protocol and M.2 interface to MSATA interface, offering flexible compatibility options for your storage devices. 2. Size and Dimensions: The convert card comes in two sizes - 8x3cm for MSATA to NGFF conversion and 9.2x3cm for NGFF to MSATA conversion. These dimensions make it suitable for a wide range of solid-state drives with different form factors. 3. Interface Specifications: The external interface of the MSATA to NGFF SSD male converter is M.2 NGFF, while the internal interface is MSATA. However, please note that it does not support NVME and PCI-e protocols. For the NGFF to MSATA adapter card, the external interface is MSATA, and the internal interface is M.2 NGFF, also without NVME and PCI-e protocol support. 4. Mounting Holes: This NGFF to MSATA male riser includes four mounting holes on the board, designed to accommodate 2230mm, 2242mm, 2260mm, and 2280mm solid-state drives. This ensures compatibility with a wide range of form factors for convenient installation. 5. Functionality Limitations: Please note that these M.2 adapters only support specific interface type conversions and do not support NVME and PCI-e protocols. Before use, ensure compatibility between the solid-state drive and the motherboard or device interface.