["150W Constant Current Adjustable Electronic Load 100V 10A Battery Tester Discharge Capacity Voltage Current Power with Modbus\n\nDescription:\n1. It can display voltage, current, power, ampere-hour, watt-hour, discharge for time, internal resistance, temperature\n2. The discharge current can be set, constant current discharge\n3. Automatic statistics of discharge ampere hour and discharge for time\n4. Pause and accumulate discharge data\n5. Intelligent fan temperature control, the fan starts when the temperature exceeds 45 degrees\n6. Multiple for protection mechanisms, anti-connection for protection, over-current for protection, under-voltage for protection, over-power for protection, over-heat for protection\n\nProduct parameters:\nModule power supply voltage: for DC 12V-36V\nMeasuring voltage: for DC 0-100V\nDischarge current: 0A-10A continuously adjustable\nDischarge power: 150W maximum (Note: Do not use over power!!)\nWorking temperature: -10~+75 degrees\nResolution: voltage 0.01V, current 0.001A\nAccuracy: voltage 1% ± 1 word, current 0.1% ± 5 words\nUndervoltage protection: Yes (1.5-30V)\nOver power protection: Yes (1-150W)\nOverheating protection: Yes (the fan starts when over 45 degrees, and the overheating for protection is 85 degrees)\nInput reverse connection: Yes\nConnection method: small silk screen B+B-for voltage measurement, large silk screen B+B-for current measurement\nFan: 8020 fan, speed 4000\nModule size: Power board part: length 123mm width 95mm height 88mm, display part: length 79mm width 43mm height 46mm\nHole size: Power board part: length 113mm width 85mm, display part: length 76mm width 39mm\nWeight: 322g\n\nPackage include \n1 x display meter\n1x adjustable load (not include the power supply )"]