Description Precise Scales: The roller die is set with clear graduations from 0 to 180 degrees, allowing the tube to be bent to the exact angle required by manual control. Anti-skid Handle: The handle is fitted with a non-slip plastic sleeve for a comfortable grip and to prevent your hands from being scratched, providing you with a safe and comfortable working experience. Application It is widely used in many fields, including construction sites, plumbing, manufacturing, heating and sanitation facilities, garage and vehicle maintenance, and home decoration. It is applicable to stainless steel and iron pipes with pipe wall less than or equal to 2mm or 0.078in and aluminum and copper pipes with pipe wall less than or equal to 3mm or 0.11in. It is applicable to 5 or 8in 0.039in pipe diameter How to Use 1. Insert the 5 or 8" OD pipe into the bend slot and pipe hook. 2. Align the zero mark before bending and slowly pull the handle to the angle you want. You can bend at any angle between 0 and 180. 3. Complete the bend. Specifications Material: Alloy, 45 Steel Color: Blue, Silver Bending Angle: 0-180 Applicable Tube Diameter: 5 or 8" Applicable Tube Wall Thickness: For Stainless Steel and Iron Pipe 2mm or 0.078in For Aluminum Tube and Copper Tube 3mm or 0.11in Length of Handle: 47cm or 18.5inch, 65cm or 25.6inch Bending Die Size: 11.5x9.8cm or 4.5x3.9inch Packing Size: 74x14x8.5cm or 29.13x5.51x3.35in Gross Weight: 2kg or 4.4lbs Package Included 1 x Tube Bender Notes Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.