Specification: Certification: CE Origin: Mainland China Material: ABS Color: White Direction: 8Pin forward STD, 8Pin reverse RVS (optional) Quantity: 1PCS Size: About 30x18x15mm/1.18x0.70x0.59inch Weight: 10g Selection description: Step 1: Confirm the number of pins of the power supply interface of the graphics card Step 2: Confirm the orientation of the interface: the power supply interface is in the positive direction when it is buckled on the top, and in the reverse direction when it is buckled on the bottom Tips: Before purchasing, please pay attention to the direction of GPU connector (forward STD or reverse RVS). The product printed with the letter A+is forward STD, and B+is reverse RVS. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Included: 1 x Adapter 1. Material: ABS plastic shell, all copper tin plating, good conductivity, fire rating is UL 94V-0, anti-aging, easy to plug. 2. Circuit Board: The four-layer circuit board is used, thickened copper foil, to ensure the stability of the high-power graphics card, and the operation and use of the beautiful appearance. Equipped with shell protection, different from other similar products only bare board or EVA pad. Reduce the pressure on connectors and cables, making them safer during assembly and long-term use, and effectively avoid the difficulty of arranging cables caused by graphics card brackets. 3. Design: 180-degree U-shaped turn design, connecting the power cord and the GPU interface, will not put pressure on the GPU interface, allowing you to use it stably for a long time. 4. Fit: You can use this adapter to install an 8pin PSU PCIE cable from vertical to horizontal to fit the case with limited height and smaller size.