Specification: Name: Solar 56 lights split induction wall light Material: Plastic ABS Switch: no switch (lights when plugged in) Energy Board: high-quality polysilicon, 5.5V 1W Size 14.8*12.7*2.4CM Solar Panel Size 12.8*13.1*1.5CM Battery: 3.7V 1200mAh lithium battery rechargeable battery Power Consumption: 1.5 W Function: Human body induction LED Quantity: 56pc 0.1W 2835SMD white light LED Sensing Distance: 5m-8m Working Hours: 6 hours of charging during the day and more than 10 hours of work at night Installation Method: Drilling holes and hanging on the wall Lamp luminous flux: 300LM Package: 1 x LED Solar Light Split design of the solar panels and the main lighting body provides larger solar charging panels to store more electricity during the day and emit longer and brighter at night. The entrance lamp is equipped with a 5m/16.5ft cable. You can easily install the charging panel in a place with enough sunlight, such as the roof; then install the lighting body on the wall, fence, entrance, etc. You will make full use of solar lights in the evening when there is plenty of daylight. 56LEDs safety light adopts the design of human body and light sensor, and it lights up in the dark only when people pass by. The detection and lighting angle is 120°. The recommended installation height is 1.8-2.5m; it can be used for entrances, passages, safety lighting, etc. Built-in IP65 waterproof grade solar light, you can use it outdoors with confidence. There will be no more rain and heat problems, and it is more sensitive and accurate in sensing. The sensing range is 5-8m and the sensing angle is 120°.