Specification: Item Type: Power Supply Adapter Board Model: LD-A250WL Material: PCB Power: 250W Input Voltage: 12V Output Voltage/maximum Load: +5VSB/2A, +5VDC/6A, +3.3VDC/6A, +12VDC/16A, -12VDC/0.05A Operating Frequency: IC built-in oscillator (250-350) kHz at Vcc-12V Feedback Reference Voltage: 0.8V±2% at 12VDC Interface: 1 x ATX24Pin, 1 x CPU4+4Pin, 1 x SATA, 1 x IDE, 1 x DC5525 Cable Length: DC Cable Length: Approx. 320mm / 12.6in CPU Cable Length: Approx. 210mm / 8.3in IDE Cable Length: Approx. 200mm / 7.9in SATA Cable Length: Approx. 150mm / 5.9in Protection Function: (for +3.3V, +12V, +5.00V and +5.00VSB power output) Overcurrent Protection: When the output current reaches the peak current, the output is turned off Short Circuit Protection: When the output is short circuited, the output is closed Working Temperature/humidity: -5 ~ 55℃/45%~75% Storage Temperature/humidity: -40℃ ~ 70℃/10%~90% Applications: MINI computers, HTPC computers, POS machines, ITX cases, web servers, advertising machines, bank terminals, low-power systems, industrial control systems, etc. [High performance] The adapter board has high performance, high heat resistance and higher reliability. [Scope of application] By directly inserting the ATX connector of the motherboard, 24 unnecessary wires are eliminated, and it is suitable for small ATX motherboards, thus saving the space of the case. [Overcurrent protection] With overcurrent protection: when the output current reaches the current, the output will be turned off. [Short-circuit protection] With short-circuit protection: when the output is short-circuited, the output is turned off. [Product Features] The output voltage/maximum load is +5VSB/2A, +5VDC/6A, +3.3VDC/6A, +12VDC/16A, -12VDC/0.05A.