Plasma Fibroblast Pen for Eyelid Lift and Wrinkle Reduction Non-Surgical 2025

69.00 CHF
la livraison GRATUITE

Plasma Fibroblast Pen for Eyelid Lift and Wrinkle Reduction Non-Surgical 2025

  • Marque: Unbranded
Verkocht door:

Plasma Fibroblast Pen for Eyelid Lift and Wrinkle Reduction Non-Surgical 2025

  • Marque: Unbranded

69.00 CHF

En stock
la livraison GRATUITE
Verkocht door:

69.00 CHF

En stock
la livraison GRATUITE

Nous acceptons les modes de paiement suivants

Description

Plasma Fibroblast Pen for Eyelid Lift and Wrinkle Reduction Non-Surgical 2025

Plasma Pen for Eyelid Lift & Wrinkle Reduction - Needle-Free Skin Tightening with Light Therapy<br> Plasma Pen Eyelid Lift Wrinkle with Needle Free Mole Remover Machine Facial Care Professional Fibroblast Eyelid Lift Face Skin Lift with Light-Good<br> What is plasma beauty pen?Maglev plasma pen is similar to carbon dioxide (CO2) laser beauty machine, it uses new generation of plasma micro district discharge technology with low temperature and high frequency , which is efficient capacity conversion material and chip control . when the needle touch the freckle skin,it produce plasma with high temperature as 2000 C immediately, and carbonize the spot freckle , then remove it.<br> When the needle touch the freckle spot,it will produce a small flame,which is different from common flame.The micro vascular will be solidified quickly without bleeding during the treatment.Then it will form carbon scabs ,protect wound skin from infection. After about 1 week, scab will shed without scar.<br> What does plasma pen can do for you?Skin beauty: verruca vulgaris, senile warts, flat wart, contagious soft wart, verrucous nevus, and sebaceous nevus, granuloma, millet papules, eyelid xanthoma, leather fat, all kinds of pigmented nevus, corns and calluses, freckles, etc.<br> Working principle<br> Plasma pen is similar to the working principle of CO2 laser cosmetic machine, it uses a new generation of highly efficient powerconversion material and chip control technology, high-frequency plasma at low temperature of the discharge to spot the pen nibcontact with bad skin spots between the quasi contact state, but at the moment a few millimeters to produce up to 2000 C high temperature plasma, using plasma body heat effect of carbonation bad spots on the skin, make it disappear permanently.<br> German maglev dot mole spot pen spray flame is completely different from ordinary flame, it's on the carbide remove bad spots,microvascular rapid solidification can be made not bleeding; Has strong sterilization effect, can clean stain bacteria never relapse, but not damage the surrounding skin dermal tissue; Also make the skin to produce oil film, forming carbon scabs automatically protect the wound from infection, prompting wound healing fast, the day can be in contact with water (do not use lotions and soaps and other chemicals), a week or so carbon scabs fall off naturally, leaving no scars.<br> OPERATION METHOD:<br> Charging Connect the charger to the end of the product, and then connect the power and charge, charging 2 hours can be used normally 10 to 15 days.<br> Environmental requirements and working conditions<br> Ambient temperature: 0C~40C<br> Relative humidity: 45% ~ 77% ((no condensation)<br> The atmospheric pressure: 70kPa~106kPa<br> Applicable power: AC220V22V 50Hz1Hz<br> Single frequency: 1.1MHz0.3MHz<br> The maximum output power: not less than 10W (peak value)<br> Advantages-Remove completely: instantly eliminate skin neoplasms and strong sterilization and never relapse<br> -No bleeding: can avoid various lesions caused by bleeding and medical risk<br> -Wound easy to recover without bandage<br> -No scar left<br> -Ease use: it can work for about 2-3 hours after 1 time charge.<br> -Economical and practical: it is cheap and needle can reuse.<br> -Easy to take<br> How to use the maglev plasma pen?1. Clean face,apply the anesthesia<br> 2. Sterilize face<br> 3. Needle disinfect ( needle immerse in disinfectant for 5-10 minutes)<br> 4. Do treatment ( we have videos to show you how to operate)<br> 5. After treatment, if needle have any carbide, use knife scrape it or sand paper rub it.<br> 6.Needle should be disinfected before use .<br> Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. YJL official store
  • Identifiant Fruugo: 444833362-934312928
  • EAN: 6909452325805

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité: Not suitable for children under 36 months
Ingrédients: Plastic 5%

Livraison & retours

Expédition dans un délai de 3 jours

  • STANDARD: GRATUIT - Livraison entre jeu. 18 décembre 2025–jeu. 25 décembre 2025 - GRATUIT

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Guangdong Yanfeng Network Technology Co.,Ltd.
  • Guangdong Yanfeng Network Technology Co.,Ltd.
  • No. 2, Yanda Avenue, Huicheng District
  • huizhou
  • China
  • 516000
  • gdyanfengkeji@163.com
  • 13138358512

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • PROCONSEIL FR
  • PROCONSEIL FR
  • 8 bis rue Abel 75012 Paris, France
  • Paris
  • France
  • 75012
  • SophieDupont@proconseilfr.com
  • 0780843245