set2: 1 x Wiring Harness and 11 x Nuts and 6 x Washers and 6 x Bushings Made of good plastic. Suitable for any guitar with peghead holes of about 10mm diameter. Fit a tuner with a 6mm shaft. Circuit wiring set for LP SG EPI Style electric guitar Wiring harness: Two volume or Two tones or Three way switch, two capacitors, one input jack socket 2 Volume and 2 Tone Knob Pots: Two A500k potentiometer, two B500k potentiometer Pots Shaft length: approx. 18mm or 0.71 inch, Base diameter: approx. 16mm or 0.63 inch, Switch: Approx. 18 x 28 x 49mm or 0.71 x 1.1 x 1.9 inch Switch Cap: Black Cap This is designed for any guitar with peghead holes of about 10mm diameter. Wiring diagram as the picture seventh shown, this harness is completely prewired. All you need to do is solder your pickups to the switch and ground them to the volume pots. Material: metal and ABS or Metal and wire Package Contents: 1 x Wiring Harness 11 x Nuts 6 x Washers 6 x Bushings Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.