Description You will receive: 1 piece of black hand shower holder. Total length is 14cm, square bottom size is 7.5cm*6cm. Material: Made of outstanding ABS plastic, rustproof, waterproof, durable, lightweight but with bearing capacity. Features and function: designed to support the shower head no need to drill, just fix it by the back adhesive film to prevent the walls from being damaged. How to attach: Measure the installation height. Make sure the wall is dry and clean. Tear off the adhesive film. Squeeze the air out when you place it on the wall. Wait half a day or a day to let it dry. Suitable on: Non-porous, smooth and paperless surfaces. to be used on ceramic tile, mirror, marble and glass wall. Product information Color: Black Material: ABS plastic Size: 14cm (total length); 7.5cm*6cm(Base) Load capacity: approx. 20 kg The function is: To support the shower head. Feature points: No need to drill. Easy to install with a back adhesive film. 360 degree rotatable spring tube. Can be a decoration in your bathroom. Fits on: Non-porous, smooth, paperless surfaces. to be used on ceramic tile, mirror, marble and glass wall. Cannot be used on the uneven wall, whitewashed wall, cement wall and wallpaper. Installation guide and warnings Measure the installation height you need. Make sure the wall is dry and not dirty before gluing the backing. Tear off the adhesive film. Squeeze the air out of the bottom of the stand when you place it in the correct position you measured. Wait 12 or 24 hours until the adhesive film is dry and fix before placing the shower head on the support. Package includes: 1 pcs of hand shower holder Note: 1.The items color may be slightly different from the pictures due to the lighting or computer screens. 2.Due to the manual or manual measurement, there may be a measurement deviation of 1-2mm.