For DJI Mavic Air 2 / 2S / Mavic 3 Parachute

CHF 159.00
KOSTENLOSER Versand

For DJI Mavic Air 2 / 2S / Mavic 3 Parachute

  • Marke: Unbranded
Verkauft von:

For DJI Mavic Air 2 / 2S / Mavic 3 Parachute

  • Marke: Unbranded

CHF 159.00

Auf Lager
KOSTENLOSER Versand

14-Tage-Rückgabepolitik

Verkauft von:

CHF 159.00

Auf Lager
KOSTENLOSER Versand

14-Tage-Rückgabepolitik

Zahlungsmethoden:

Beschreibung

For DJI Mavic Air 2 / 2S / Mavic 3 Parachute

1. Intelligent safety parachute, high-speed rescue, buzzer warning and positioning 2. Manti 3Manti 3 Plus has a built-in electronic flight recorder, which can record UAV flight and performance parameters. The information recorded by the recorder can be used for UAV flight accident analysis, reproduce the accident process, and analyze the cause of the accident concretely ( Built-in 150mAh battery, 4 hours working time, 1GB data storage) 3. Dual sensor data fusion: horizontal and vertical activation, effectively avoiding propeller entanglement, and reducing the additional risk of bombing caused by rescue triggers 4. The flight attitude can accurately identify the danger and omnidirectional perception, and can respond to the dangerous situation in the fastest 0.5 seconds, so as to judge the opening of the parachute, it needs to cooperate with the inner eight to stop the propeller, so that the machine can make a safe landing 5. To upgrade the DFU firmware, you need to download the desktop version of the Firefly software, and you can manually select the model to match the firmware 6. There is a silicone pad design at the bottom of the parachute main unit, which can effectively prevent the drone from being scratched 7. The umbrella cabin of Manti 3Manti 3 Plus is for one-time use. After the parachute is opened, the umbrella cabin needs to be replaced before it can be used. 8. When installing, please be careful not to cover the battery switch and the sensor below Parameter: 1. Speed reduction: 5ms-5.5ms (the difference depends on the size of the drone) 2. Normal working hours: 4 hours 3. Working temperature: -10-60 degrees Celsius 4. Response time: 100 milliseconds 5. Response distance: 8 meters 6. Working altitude: less than or equal to 4000 meters 7. Charging voltage: 5V 1A 8. Equivalent drop distance: 1.6 meters and below 9. Consumable parts: umbrella cabin 10. Buzzer: Yes 11. Firmware upgrade: support (DFU) 12. On-board detection: support (6 meters above the ground to enter the alert mode, only after entering the alert mode can the flight accident be detected and the parachute opened) 13. Main material: PC 14. Net weight: 63.3g (Manti 3), 89.2g (Manti 3 Plus) 15. Dimensions: 5 x 4.5 x 3.7cm (Manti 3), 6 x 6 x 4.2cm (Manti 3 Plus) Applicable models: -Manti 3: Mavic 3AIRAIR 2AIR 2SMavic proMavic 2 -Manti 3 Plus: Mavic 3 Mavic 2Mavic pro
  • Fruugo-ID: 449811637-947120621

Produktsicherheitsinformationen

Bitte beachten Sie die unten aufgeführten spezifischen Produktsicherheitsinformationen für dieses Produkt

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Produktsicherheitsetiketten

CE Mark
Sicherheitswarnungen: Check the product before use to ensure safe usage;, keep away from fire, clean thoroughly after contact with liquids to avoid corrosion or rust.
Teilenummer des Herstellers: 1920-X
Modellnummer: TBD0603683501
Seriennummer: 1292329323
Chargennummer: TTX-1

Lieferung und Rückgaben

Versand innerhalb von 24 Stunden

  • EXPRESS: KOSTENLOS - Lieferung zwischen Mo. 09 Februar 2026–Di. 10 Februar 2026 - KOSTENLOS

Versand von China.

Wir tun unser Bestes, um dafür zu sorgen, dass die von Ihnen bestellten Produkte vollständig und gemäß Ihrer Spezifikationen an Sie geliefert werden. Wenn Sie allerdings eine unvollständige Bestellung oder Artikel erhalten, die sich von den bestellten unterscheiden, oder es einen anderen Grund gibt, warum Sie mit Ihrer Bestellung nicht zufrieden sind, können Sie die gesamte Bestellung oder einzelne darin enthaltenen Produkte zurücksenden und eine vollständige Rückerstattung für die Artikel erhalten. Vollständige Rückgaberichtlinie ansehen

Details zur Produktkonformität

Bitte beachten Sie die unten aufgeführten Konformitätsinformationen zu diesem Produkt.

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Hersteller:
Es folgen die Kontaktdaten für den Hersteller des jeweiligen Produkts, das auf Fruugo verkauft wird.

  • PULUZ
  • Shenzhen PULUZ Technology Limited
  • 8/F, No.614 Building, Bagua 1st Road
  • Futian District, Shenzhen, guangdong
  • China
  • Shenzhen
  • CN
  • 518029
  • support@puluz.com
  • +86 755 83035355
  • https://www.puluz.com/

Verantwortliche Person in der EU:
Es folgen die Kontaktinformationen für die verantwortliche Person in der EU. Die verantwortliche Person ist der benannte Wirtschaftsteilnehmer mit Sitz in der EU und verantwortlich für die Compliance-Verpflichtungen in Verbindung mit dem jeweiligen Produkt, das in die Europäische Union verkauft wird.

  • Yating He
  • E-CrossStu GmbH
  • Mainzer Landstr.69
  • Frankfurt am Main, Hessen,Deutschland
  • Germany
  • Frankfurt am Main
  • DE
  • 60329
  • E-CrossStu@web.de
  • +49 69332967674