1. Complies with IEEE 802.3af Power over Ethernet (10/100 Mbps supported). Extends PoE range by an additional 100 meters. 2. Automatically detects and protects PoE devices from incorrect installation. 3. Plug-and-play — no configuration required. 4. 3-port PoE extender forwards both Ethernet data and PoE power to one terminal device via Cat5, Cat5e, Cat6, or UTP cable. 5. Features three 10/100 Mbps LAN ports: one for PoE input, two for PoE output. Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, and IEEE 802.3af PoE standards. 6. Compatible with wireless access points, IP cameras, IP phones, and other network devices where AC power is unavailable or distant from the installation location. 7. Suitable for deployment in hotels, schools, office buildings, and residential areas. Network Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x PoE Standards: IEEE 802.3af PoE Input Power: Up to 30W PoE Output Power: Up to 24W per port (average 8W) PoE Pin Assignment (Input): Pins 1/2+, 3/6−, 4/5+, 7/8− PoE Pin Assignment (Output): Pins 1/2+, 3/6− Cable Support: Category 5 or higher unshielded twisted pair (UTP) MAC Address Table: 2K Packet Buffer Memory: 48 KB Switching Capacity: 1.0 Gbps Network Protocols: IEEE 802.3i (10BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.3x (Flow Control), IEEE 802.3af (PoE) Operating Temperature: −10°C to 55°C Operating Humidity: 10%–90% (non-condensing) Color: White Material: Plastic Package Includes: 1 × PoE Extender Note: Color may vary slightly due to screen settings and lighting conditions. Dimensions may vary by ±1–3 cm.