1.Anti Short connection protection:Connect the red clip with the black clip when the power is on,No damage2.Anti Over-discharge protection:Low voltage start,LED will flash at the frequency of 1HZ if the voltage is below 10.5V3.Anti-reverse charge protection:After the car is started,Anti-reverse charge current is less than 1A4.Anti Reverse polarity protection:Reverse connection with the Negative and positive end of the clamp and battery terminal,No damage5.Anti High Temperature Start:When the temperature of the jump starter is higher than 80 Centigrade,the smart cable will prevent the current flow,to protect the jump starterInstruction:1.Connect the red and black battery clips to the positive and negative of car battery.2.Insert plug of battery clips into start outlet of start power.3.Turn auto key to start shift to start auto.4.If the auto can not be started, turn the key after several seconds until it is started successfully.5.Afterwards, pull storage battery plug from start power supply and remove clip from auto battery.Product Name: Relay Smart ClipVoltage: 12VPractical current: 500A, instantaneous current: 700ACable length: total length including head: 36CM red, 28CM blackSuitable for: Low-displacement, high-displacement cars (1.5, 1.8, 2.0, 2.4, 2.5, 3.0, 3.5) displacement carsProduct features: Multi-function protection type: high voltage protection, low voltage protection, over current protection, low current protection, anti kickback protection, anti reverse connection protection, high temperature protection, low temperature protection, short circuit protection, anti over discharge protectionColour:Photo ColorMaterial:Plastic + MetalPackage Contents:1 x clipOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.