Warm tips: This fan balancing kit is compatible with most ceiling fans. Specific function: The plastic balancing clip helps locate the problem area, and self-adhering 5g weights help correct wobble. The permanent weights are secured with strong adhesive to prevent detachment. Working principle: When the fan rotates, airflow resistance varies across the blade surface. Placing the weight at the optimal position minimizes imbalance by counteracting uneven mass distribution. Advantages: This fan blade balance kit solves wobble caused by irregular blades or blade holders. It helps reduce noise, prevent premature wear, maintain structural integrity, and extend the fan’s service life. Using Steps: 1. Turn on the fan and set it to the speed where wobble is most noticeable. 2. Turn off the fan and wait for it to stop completely. Select one blade and place the balancing clip halfway between the blade holder and blade tip, along the trailing edge. 3. Turn on the fan and observe whether wobble increases or decreases. Turn off the fan, move the clip to another blade, and repeat testing on all blades. Note which blade shows the greatest improvement. 4. Return the clip to the blade with the greatest improvement. Adjust its position inward or outward while operating the fan to find the spot that delivers the best correction. 5. Remove the clip and apply a balancing weight to the top of the blade, centered near the position where the clip delivered optimal results. 6. If wobble persists, repeat the process using additional weights as needed. Color: Black, Silver Material: Plastic, Metal Package Contents: 4 x balancing clips, 4 x 5g adhesive weights