SDR Receiver RTL2832U + R820T2 Chip with 1PPM TCXO, ADS-B Capable, Frequency Range 0.1 MHz to 1.7 GHz The signal received by the antenna is converted into digital data by this receiver and transmitted to computers, Android devices, and other compatible devices via USB interface. Compatible software processes the demodulated signal, displays the frequency spectrum, allows adjustable bandwidth settings, signal recording, saving, and playback. Receives electromagnetic signals from 100 kHz to 1.7 GHz. Supports AM, FM (NFM, WFM), CW, LSB, and USB demodulation. Suitable for shortwave communications, FM radio, aviation band monitoring, ADS-B decoding, meteor scatter reception, and general signal analysis. Features: - Built-in temperature-compensated crystal oscillator (TCXO) for improved frequency stability and accuracy. - Optimized thermal design for stable operation. - Uses RTL2832U + R820T2 chipset — the R820T2 tuner offers enhanced sensitivity, lower noise floor, and improved performance near 1.5 GHz compared to earlier tuners. - Q-channel utilization on RTL2832U enables direct sampling reception from 100 kHz to 24 MHz, enabling full-band coverage from 100 kHz to 1.7 GHz. - Compatible with Windows XP/7/8/10, Android, and other supported platforms. Specifications: - Type: Includes Antenna - Dimensions: 71 × 43 × 19 mm (2.80 × 1.69 × 0.75 inches) - Weight: 34 g - Color: Silver - Housing Material: Metal Package Includes: - 1 × SDR Receiver - 1 × Antenna Note: Colors may vary slightly due to screen settings and lighting conditions. Dimensions are subject to a tolerance of ±1–3 cm.