[DETAIL]<br>Note: If you choose the zigbee plug, you need a zigbee3.0 gateway to work properly. This zigbee gateway needs to be purchased additionally.<br>It supports with zigbee2mqtt and home assistant.<br>Product parameters: Eurocode 16/20A<br>Product size: 50*50*84mm<br>Weight: 0.09kg<br>Input voltage: AC100-240V 50/60Hz.<br>WIFI standard: 2.4GHz 802.11 b/g/n g/n.<br>Indicator light: blue light indicator switch and distribution network<br>Shell material: PC+ABS fire rating V0<br>Working temperature: -20-50℃<br>Certification standard: CE/ROHS<br>Graffiti smart or smart life APP can be remotely controlled by mobile phone by connecting with WiFi router.<br>Support Alexa, Google Home, Tmall Elf Xiaoai and other intelligent voice control.<br>Mobile APP remote control, intelligent timing, intelligent scene linkage, power statistics, sharing control.<br>APP distribution network operation steps<br>A. One-button configuration<br>1. Please connect the mini-socket to the power supply and wait for the blue indicator light to flash, or press and hold the key for 5 seconds until the blue indicator light flashes (twice per second).<br>2. Connect the mobile phone to wifi and confirm the success.<br>3. Open the APP, click the Add icon in the upper right corner of the device list, and then select "Socket" to enter the interface of configuring devices.<br>4. Click "Please confirm that the indicator light is flashing", enter the password of the WIFI currently connected to the mobile phone, and click "Confirm".<br>5. Wait for the configuration. After the configuration is successful, click "Finish" to jump to the function interface of the socket.<br>2.AP configuration<br>AP configuration is a paving configuration method. If one-click configuration fails, AP configuration can be used. The method is as follows:<br>1. Press and hold the key for 5S, and the indicator light will flash slowly (on for 2 seconds and off for 2 seconds).<br>2. Open the APP, click the Add icon in the upper right corner of the device list, select "Socket" to enter the interface of configuring devices, and click.<br>Compatibility Mode" enters the AP configuration interface.<br>3. Click "Please confirm that the indicator light is flashing slowly", enter the password of the WIFI currently connected to the mobile phone, and click "Confirm".<br>4. Click "Disconnect" to jump to the WIFI list interface, select SmartLife-XXXX and click "Connect".<br>5. Click the back button on the phone and wait for configuration. After successful configuration, click "Finish" to jump to the function interface of the socket.<br><br>[ATTRIBUTES]<br>- High-concerned chemical: None<br>- Origin: Mainland China<br>- Certification: CE<br>- High-concerned chemical: None<br>- Origin: Mainland China<br>- Certification: CE<br>- Smart home platform: Tuya