Suitable for various coins. CPU-controlled processing with accurate scoring. Precision and standard detection modes for smoother coin handling. Pulse output with adjustable pulse width. Anti-cheating features including tamper detection and alarm. Compatible with water vending machines, snack vending machines, and arcade game machines. Coin identification accuracy: 95% Supported coin specifications: Diameter: 15 mm – 29 mm Thickness: 1.8 mm – 3.0 mm Compatible with a wide range of domestic and international coins. Operating atmospheric pressure: 80 kPa – 106 kPa Operating voltage: DC 12 V ±10% Operating current: 50 mA Peak current: 350 mA (for less than 0.5 seconds) Operating humidity: up to 95% RH Storage temperature: -20°C to +85°C Operating temperature: -15°C to +60°C Recognition speed: 0.6 seconds per coin Recognition accuracy: 99.5% Setup Instructions: 1. Press the “Set” button (Key 8) to enter setup mode. The display shows “E” (currency system selection). Use the “+” or “–” keys to select the desired currency system, then press “Set” to confirm. 2. Display shows “H” (sample count for coin value calibration). 3. Display shows “P” (pulse output value setting). 4. Display shows “F” (detection sensitivity setting). 5. Continue through settings as prompted. Once complete, power cycle the unit when “E” is displayed to save and apply settings. Color: As shown in photo Material: Plastic + metal Package Contents: 2 × Coin Acceptor Units Note: Color may vary slightly due to screen settings and lighting conditions. Measurement tolerance: ±1–3 cm.