This 72V to 24V DCDC Stepdown Converter provides reliable conversion from voltage DC sources to a regulated 24 V output for 24 V loads. It accepts a wide input range of 30 V to 90 V DC and delivers up to 5 A of continuous current with constant voltage regulation. Key benefits Wide input range (30–90 V DC) enables use with various voltage sources, including 72 V systems. Fixed 24 V output with constant voltage regulation helps protect sensitive 24 V devices from voltage fluctuations. Up to 5 A continuous current supports multiple 24 V loads or highercurrent devices. Stepdown buck design efficiently reduces higher input voltages to the required 24 V level. Facilitates reliable operation of 24 V systems from larger DC rails in automotive, industrial, solar, and telecom environments. Key attributes Functionality: DCDC stepdown (buck) converter with constant voltage output. Output: 24 V DC, rated for up to 5 A. Input: 30 V to 90 V DC, designed to take power from higher voltage sources such as 72 V systems. Performance: Provides a stable 24 V output suitable for powering 24 V equipment from a highervoltage supply. Size and material: Physical dimensions and enclosure material are not specified. Compatibility: Intended for use with DC sources in the 30–90 V range to supply 24 V loads, aligning with 72 V to 24 V conversion needs. Typical use cases Automotive or industrial equipment: Power 24 V sensors, controllers, and peripherals from a 72 V or higher DC electrical system. Offgrid or solar installations: Feed 24 V lighting, telemetry, or communication gear from a 72 V nominal battery bank or higher DC source. Telecommunication and data equipment: Supply stable 24 V operation for 24 Vrated equipment drawn from higher voltage DC rails in infrastructure settings. Notes This device provides a constant voltage output suitable for protecting and stabilizing 24 V loads when powered from a highervoltage DC source within the specified input range. Physical size and enclosure material details are not provided; verification may be needed for panel mounting or enclosure compatibility in your specific installation.