Product: Grinding and polishing accessory Key benefits Delivers controlled grinding and finishing when used with sandpaper and a bristle wheel. Consistent detachment depth control (7 cm) helps ensure repeatable results on joints, edges, and fittings. Compact size (135 x 22 mm) fits into tight spaces and is easy to handle and position. What it does Function: Designed for surface preparation and finishing. Use sandpaper to perform initial grinding/abrasion, then use a bristle wheel to polish and blend the surface. Detachment depth: Insert the accessory to a depth of 7 cm to achieve the designed removal or access depth. Size: 135 x 22 mm, small profile for accurate work in confined areas. Technology: Not specified. Compatibility and performance Intended for use with standard sandpaper and bristlewheel polishing tools. Works where a controlled depth and compact form factor are needed for grinding and polishing tasks. Performance depends on abrasive grit and bristlewheel choice; select grits and wheel stiffness appropriate for the material and finish required. Practical use scenarios Metal deburring and edge blending: Use sandpaper to remove burrs and then a bristle wheel to smooth and polish joints or cut edges. Surface preparation for coatings: Grind faded or rough areas with sandpaper, then polish with a bristle wheel to create a clean, even surface for painting or bonding. Tightspace finishing: The 135 x 22 mm size and 7 cm insertion depth let you access and finish small cavities, pipe fittings, and narrow channels. Simple usage steps 1. Fit compatible sandpaper to perform initial grinding or material removal. 2. Switch to a bristle wheel to polish and refine the surface. 3. Insert the accessory to the specified depth (7 cm) for controlled detachment or finishing. Specifications Size: 135 x 22 mm Detachment/insertion depth: 7 cm Use: Sandpaper for grinding; bristle wheel for polishing Technology: Not specified Notes Select sandpaper grit and bristlewheel type appropriate to the material and finish you need. Follow the safety and operating instructions of the host tool or machine when mounting and using abrasives.