Vertical 100W Wind Turbine Generator for 12V and 24V Systems This compact vertical wind turbine generator provides a reliable local power source for small offgrid and auxiliary applications. It combines a permanent magnet levitation generator with aerodynamic spiral blades to deliver smooth, lownoise power generation and durable operation in a range of conditions. Key benefits Efficient power conversion: Copper wire permanent magnet levitation generator reduces friction loss and lowers starting torque for improved electrical output at low wind speeds. Low startup and quiet operation: Aerodynamically shaped nylon fiber blades and auxiliary wind wheel enable startup from 2.5 m/s while producing only about 30 dB of noise during operation. Durable construction: Nylon fiber blades, aluminum, stainless steel, copper, and plastic spraying treatment offer hardness, corrosion resistance, and long service life. Stable in strong winds: Spiral horizontal rotation design reduces wind pressure and helps the unit withstand wind events up to the rated safe wind speed of 35 m/s. Easy integration: Compatible with 12 V and 24 V systems; includes an IP67rated controller and electromechanical brake for reliable control and protection. Practical applications Small homes and cabins: Charge gel or leadacid batteries for lighting, small appliances, and battery maintenance. Marine and mobile use: Mount on boats, mobile homes, or RVs to supplement battery charging while underway or at anchor. Remote lighting and outdoor equipment: Power gazebo lighting, streetlight tops, or equipment at remote sites where grid access is limited. What sets it apart Permanent magnet levitation generator for lower losses and smoother starts. Spiral blade layout rotating in the horizontal plane for stable performance and reduced vibration. Low audible output and compact dimensions suitable for residential and small commercial installations. Main specifications Maximum power: 100 W Rated voltage: 12 V and 24 V (compatible with 24 Volt systems) Generator type: Copper wire permanent magnet levitation Braking type: Electromechanical brake Controller protection level: IP67 Fan blades: 4 Wheel diameter: 53 cm (20.87 in) Product size (D x H): 53 x 75 cm (20.87 x 29.53 in) Startup wind speed: 2.5 m/s (5.59 mph) Rated wind speed: 13 m/s (29.08 mph) Safe wind speed: 35 m/s (78.29 mph) Working temperature range: 40 to 80 C / 40 to 176 F Noise level: 30 dB Materials: Nylon fiber blades, aluminum, copper, stainless steel; plastic spraying finish Flange: DN20 Outer diameter: 10.5 cm (4.13 in) Inner diameter: 7.5 cm (2.95 in) Hole quantity: 4 Hole diameter: 1.4 cm (0.55 in) Rod connection diameter: 5.6 to 6.2 cm (2.2 to 2.44 in) Assembly required Net weight: 10.5 kg (23.15 lbs) Gross weight: 12 kg (26.46 lbs) Package size: 86 x 38 x 20 cm (33.86 x 14.96 x 7.87 in) Package contents 1 x Vertical Wind Turbine Generator 1 x Controller Other needed accessories (mounting hardware and additional wiring not included) Installation and operation notes Check dimensions and mounting clearances before ordering and installation. Use only gel batteries or leadacid batteries with this unit; lithium batteries are not suitable. Mounting height and location depend on the installation environment. Ensure a 360degree unobstructed wind flow around the unit for performance. Wiring: Connect the three green wires from the controller to the three wires of the fan without distinguishing poles. Connect the red and black wires from the controller to the positive and negative poles of the battery respectively. Allow for slight color variation and 1 to 3 cm measurement tolerance due to manual measurement. This vertical wind turbine generator is designed for straightforward integration into small offgrid and auxiliary power systems where low startup speed, quiet operation, and durable construction are required.