DC7909 8mm Male DC Power Pigtail to Bare Wire Overview A ready to use DC7909 male plug pigtail with bare wire open end for repairing worn power cords or creating custom DC power connections. The plug housing is ABS and the cable has a PVC insulated jacket. Available in two lengths to suit different installation needs. Key features Connector type: DC7909 8mm male plug Bare wire end: color coded red and black to indicate polarity Wire gauge: 14AWG for lower resistance and stable current flow Materials: ABS plug housing and PVC insulated jacket Installation: bare wire end is easy to solder or terminate Length options: 30 cm or 100 cm Package contents: 1 Pc power cable Why choose this cable Fast and replacement: Restore a damaged power cord quickly without replacing the entire adapter or device cable. Clear polarity identification: Red and black conductors reduce wiring errors during installation. Reliable current handling: 14AWG conductor supports higher current demands compared to thinner pigtails, improving performance for small DC systems. Simple to install: The bare wire ends are ready for soldering, crimping, or terminal block connection. Typical applications Solar systems: Connect small solar panels, charge controllers, or inverters where a DC7909 plug is required. Laptop and equipment power : a worn or damaged DC plug cable to restore device power delivery. DIY electronics and CCTV: Power LED strips, cameras, routers, and other low voltage DC equipment that accept a DC7909 male connector. Specifications Connector: DC7909 male 8mm Conductor: 14AWG Plug housing: ABS Insulation: PVC jacket Length: 30 cm or 100 cm Package: 1 Pc power cable Notes Allow a 1 to 2 cm tolerance for manual measurement. Actual product appearance may vary slightly from photos depending on monitor settings.