1. Designed specifically for M.2 NVMe SSDs. 2. Systems with motherboards that do not support NVMe may require BIOS updates to enable boot functionality. 3. Verify that your device’s Mini-PCIe slot is currently occupied by a Wi-Fi card. This adapter is not compatible if the slot is used for other devices. 4. Recommended for NVMe M.2 (NGFF) SSDs in 2230 or 2242 form factors. Not compatible with SATA-based M.2 SSDs. 5. This adapter is approximately 3 mm longer than a standard full-height Mini-PCIe Wi-Fi card. The assembled adapter + SSD assembly is thicker than the original Wi-Fi card. Ensure sufficient internal space before purchasing. Interface: Mini-PCIe to M.2 Key-M Supported lengths: 2230, 2242, 2260, 2280 Interface speed: PCIe 3.0 x1 (NVMe or PCIe protocol SSDs only) Operating temperature: -5°C to 70°C Compatible operating systems: Windows 10, Windows 11 SSD installation instructions: A. Align the SSD mounting hole with the groove in the center of the copper standoff. B. Secure the SSD using screws from the bottom side. Note: Appearance, color, and printed markings may vary slightly between production batches. These variations do not affect performance or functionality. Color: As shown Material: PCB + copper Dimensions: Approx. 123 mm x 21 mm Package includes: - 3 x Expansion cards - 3 sets of mounting screws This listing includes only the items listed above. Accessories and devices shown in images are for illustration only and are not included. Note: Screen settings and lighting conditions may cause slight color differences between product images and the actual item. Dimensional tolerance: ±1–3 cm.