Pneumatic PET Strapping Tool for Heat Friction Welding and Cutting Key benefits Fast, consistent seals: fusion time 2 to 5 seconds delivers repeatable heat friction welds without fasteners. tensile tightening: tightening force 3500 N at the working pressure of 0.63 MPa provides secure straps for heavy loads. Low air use and compact size: consumes only 0.3 L per minute and measures 300 mm long (base 70 mm) by 149.5 mm wide and 173 mm for easy handling and installation. Durable construction: body and components are made from strength alloy material for long service life under industrial use. Easy operation and reduced operator fatigue: lightweight, ergonomic design and automated functions simplify repeated strapping cycles. Technical specifications Required working pressure range: 0.5 to 0.7 MPa (72 to 100 psi) Recommended working pressure: 0.63 MPa Compressed air consumption: 0.3 L per minute Fusion time: 2 to 5 seconds Dimensions: total length 300 mm; base length 70 mm; width 149.5 mm; height 173 mm Compatible strap material: PET Strap width: less than 19 mm Strap thickness: 0.5 to 1.5 mm Functional components Tightener: delivers 3500 N at 0.63 MPa for strong strap tension. Cutting devices: Heavy cutting device: blade holder and blade for cutting PET straps 0.5 to 1.5 mm thick. Friction cutting device: designed for cutting light PET straps 0.5 to 0.7 mm thick. Performance and suitability Designed for heavy duty packaging tasks including metal and aluminum alloy bundles, large cartons, and palletized loads where a strong, clean weld is required. No mechanical fasteners required; sealing is achieved by friction heat welding for a neat, reliable joint. Compact and controllable fusion housing supports precise weld control and repeatable results in production environments. Typical applications Industrial bundling of steel or aluminum profiles and bars where strap tension is required. Warehouse palletizing and transit packaging for medium to heavy loads using PET strapping up to 19 mm wide. Assembly and operations that need fast cycle times and low air consumption for throughput. What makes it stand out Combines tightening force and dual cutting systems to handle a wide range of PET strap thicknesses. Robust alloy construction and compact footprint make it suitable for continuous use in demanding packaging lines. Short fusion times and low air consumption reduce cycle time and operating cost per strap while maintaining consistent weld quality.