Promotion! 8-inch Screen Printing Squeegee, Single-Blade 70-Degree Ink Squeegee, Rubberwood Promotion! 8-inch Screen Printing Squeegee, Single-Blade 70-Degree Ink Squeegee, Rubberwood Product Features: Features a single-blade 70-degree flat blade, one-piece polyurethane material. Designed to balance the squeegee's tolerance to various inks while maintaining high abrasion resistance. Features a classic curved wooden handle with a smooth surface. Dimensions (Length): 8 inches. Approximately 1.5 inches of polyurethane protrudes from the wooden handle. Product Introduction: A squeegee, also known as a doctor blade, is a tool used to scrape ink off a screen, allowing it to penetrate the substrate. Suitable for printing and textile applications, it can be used in all hand printing and various machine printing applications. These squeegee blades are kiln-dried, and the handles are made of precision-cut wood, making them resistant to deformation, smooth, comfortable, and easy to operate, helping to alleviate carpal tunnel syndrome symptoms. The blades are molded under high temperature and pressure, with a tensile strength exceeding 900 kg. This squeegee removes ink stains and provides excellent, durable printing edges. Specifications: Material: Rubber, Wood Hardness: 70 degrees Length: 20 cm/7.9 inches Width: 10 cm/3.9 inches Thickness: 2.3 cm/0.9 inches Color: As shown in the picture Package Includes: 1 x 70-degree 20 cm screen printing squeegee Note: The hardness of this squeegee has not been tested using a hardness tester or measuring instrument. Squeegee materials typically range in hardness from 50 to 90, with 50 being the softest and 90 the hardest. We consider this squeegee to be of medium hardness, slightly elastic, and will leave an indentation when pressed with a fingernail. We rate this product a hardness of 60, which is considered medium softness. Package includes only the contents shown above; other products are not included. Note: Light during photography and different monitors may cause the color of the item in the picture to differ slightly from the actual product. The allowable error range is ±1-3 cm.