Size: 3 m x 6 m (10 ft x 20 ft) Overview This polyethylene geo grid ground support system stabilizes pavement and slope infill by confining lateral movement and distributing applied loads over a wider area. Designed with drainage openings, the grid allows water to pass through while keeping the encased layer intact, reducing erosion and preserving surface integrity. Key benefits Reduces the amount of base material required by up to 50 percent, lowering material and transportation needs. Reduces stress on the subgrade by spreading downward pressure across a larger area, improving longevity of paved and unpaved surfaces. Lowers overall installation cost through reduced rock and aggregate requirements and faster installation. Main features Material: density polyethylene (HDPE) for long service life. Height: 2 inches (5 cm). Loadbearing capacity: 4400 lbs (2000 kg) per unit of coverage when cells are filled. Fully expanded single cell area: 15.7 x 15.7 inches (40 x 40 cm). Foldable and expandable design for compact storage and transport. Cells can be cut and joined easily to fit irregular areas. Drain holes allow water to pass through, preventing trapped moisture and reducing erosion. Suitable for automobile and light truck traffic when filled. Typical applications Permeable pavements and paver support Parking areas, RV parking, and marinas Driveways, access roads, and fire access lanes Trails, walkways, and golf cart paths Slope reinforcement, retaining walls, and roadside shoulder stabilization Pavement base support, subgrade improvement, and earthwork Practical use scenarios 1) Driveway stabilization on sandy soil Spread the geo grid over prepared subgrade, anchor, and fill cells with gravel or crushed stone. The grid confines the aggregate, reduces rutting, and decreases the depth of base material required, producing a stable, lowmaintenance driveway that supports cars and light trucks. 2) Permeable parking area for a small commercial site Install the grid as a base layer beneath permeable pavers or loose aggregate. The structure distributes vehicle loads and allows stormwater to drain through the cells, reducing runoff while maintaining surface strength. 3) Slope erosion control and garden pathways Attach multiple grid panels to the slope, fill cells with soil and seed or gravel. The honeycomb structure holds infill in place, reduces washout, and creates durable access paths or reinforced green slopes. Installation overview 1. Unroll and expand the grid to cover the area. 2. Anchor the grid to the subgrade. 3. Cut and join panels as needed to fit the site. 4. Fill cells with chosen material such as soil, grass, sand, gravel, stones, or concrete. No special equipment is required for typical residential or light commercial installations. Compatibility and performance Works in sandy areas, permafrost regions, collapsible loess soils, and other unstable subgrades. Compatible with a wide range of infill materials and paving systems. Each 3 m x 6 m unit provides a durable mat that improves load distribution and reduces installation material needs. This 3 m x 6 m landscape geo grid offers a practical, easy to install solution for stabilizing surfaces, improving drainage, and reducing base material requirements across a broad range of landscaping and light infrastructure projects.